Setting The Duration; Setting The End - AEG BE4003001M User Manual

10 www.aeg.com
Clock function
DURATION
END
TIME DELAY
MINUTE MINDER
7.2 Setting and changing the
time
You must set the time before you
operate the oven.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer
is not set.
Press the
time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
again and again until

7.3 Setting the DURATION

1. Set an oven function and
temperature.
2. Press
starts to flash.
3. Press
time.
The display shows
4. When the time ends,
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.

7.4 Setting the END

1. Set an oven function and
temperature.
Application
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the
operation of the appliance.
or to set the correct
starts to flash.
again and again until
or to set the DURATION
.
flashes and
2. Press again and again until
starts to flash.
3. Press or to set the time.
The display shows
4. When the time ends,
an acoustic signal sounds. Press any
button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
6. The appliance deactivates
automatically.
7.5 Setting the TIME DELAY
1. Set an oven function and
temperature.
2. Press again and again until
starts to flash.
3. Press or to set the time for
DURATION.
4. Press .
5. Press or to set the time for
END.
6. Press to confirm.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds.
7. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
8. The appliance deactivates
automatically.
.
flashes and