Setting The Duration; Setting The End - AEG PRO COMBI BS7304021M User Manual

14 www.aeg.com
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Touch
2. Touch
3. Touch
4. Touch
The display shows the new time.
To change the time of day touch
again and again until

7.3 Setting the DURATION

1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION time.
4. Touch
starts automatically after 5 seconds.
5. Use
DURATION time.
6. Touch
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
setting flash in the display. The appliance
deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Turn off the appliance.

7.4 Setting the END

1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
or
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
and 12:00.
or to set the hours.
or .
or to set the minutes.
or .
starts to flash.
again and again until
or to set the minutes for
or the DURATION time
or to set the hours for
. The DURATION time
and time
again and again until
or to set the END and
to confirm. First you set the
and the
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use
or to set the minutes for
DURATION.
4. Touch .
5. Use
or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing
7. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes. and the time setting flash in
the display. The appliance deactivates
automatically.
8. Touch a sensor field or open the
oven door to stop the acoustic
signal.
9. Turn off the appliance.
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and
dot shows which clock
function is on in the Clock /
residual heat display.
7.6 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature.
.
. The