Setting The End; Setting The Duration - AEG BP5304001M User Manual

Clock function
DURATION
END
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIMER
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press or to set the hours.
2. Press
to confirm and switch to set
the minutes.
The display shows
hour. "00" flashes.
3. Press or to set the current
minutes.
4. Press to confirm or the set time of
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.

6.3 Setting the DURATION

1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
the hours for DURATION time.
Application
To set how long the appliance operates. Use only when
an oven function is set.
To set when the appliance deactivates. Use only when
an oven function is set.
To combine DURATION and END function.
Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appli-
ance operates. It is on immediately when the oven
starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END, core temperature sensor.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
and
deactivates automatically.
5. Press any button to stop the acoustic
6. Turn the knob for the oven functions

6.4 Setting the END

and the set
1. Set an oven function.
2. Press
3. Press
4. Press
At the set time an acoustic signal sounds
for 2 minutes.
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
6. Turn the knob for the oven functions
6.5 Setting the TIME DELAY
function
1. Set an oven function.
to confirm.
signal.
to the off position.
again and again until
starts to flash.
or to set the hours and
the minutes for END time.
to confirm.
and time setting flash
signal.
to the off position.
ENGLISH 11
and time