Clock Functions; Setting The Duration Or End - AEG BE5304001 User Manual

10

Clock Functions

Button
,
Heat-up / Residual heat indicator
If you activate an oven function, the bars in the display come on one by one. The bars
show that the oven temperature increases or decrease
CLOCK FUNCTIONS
SYMBOL
Press again and again to switch between the clock functions.
To confirm settings of the clock functions use
confirmation.

Setting the DURATION or END

1. Press
or
2. Press
3. Press
4. Press
5. Press
A sound operates after the time ends for 2 minutes.
flash in the display. The oven stops.
6. Press any button or open the oven door to stop the sound.
Function
MINUS, PLUS
MINUTE MINDER
TEMPERATURE
FUNCTION
MINUTE MINDER
TIME OF DAY
DURATION
END
again and again until the display shows
flashes in the display.
or to set minutes.
to confirm.
or to set the necessary hour.
to confirm.
To set a value for temperature or time
To set the minute minder. To switch ON/OFF
light in oven cavity, hold button more than 3
seconds
To check temperature inside the oven cavity.
To check the Food Sensor temperature, when
is connected (if applicable). Use only when the
oven function is set.
Use to set a countdown time. This function has no effect on
the operation of the oven.
To set, change or control the time of day. Refer to 'Setting the
Use only when the oven function is set to set how long the
Use only when the oven function is set to set when the oven
stops. You can use Duration and End at the same time (Time
delay), if the appliance is to be activate and deactivate auto-
or wait 5 seconds for an automatic
Description
DESCRIPTION
time of day'.
oven operates.
matically later.
or .
or symbol and time setting