Installation Preparation; Materials You Will Need; Tools You Will Need - GE Spacemaker Series Installation Instructions Manual

Built-in dishwashers

Hide thumbs

Table of Contents

Available languages

PARTS SUPPLIED IN

INSTALLATION PACKAGE:

• Two 8-18 x 5/8" Phillips-head wood screws

• #10 hex head screw and junction box cover

• Drain hose (78" long)

• Hose clamp

• Literature, product samples and/or coupons

MATERIALS YOU WILL NEED:

• WX09X70910 or WX09X70911 power cord if

applicable to your installation, or electrical cable

• UL-Listed wire nuts (3)

• Thread seal tape

• 90° elbow (¾" hose internal thread on one end,

opposite end sized to fit water supply)

• GPF65 Side-mount bracket kit for use with granite

countertops

For New Installations Only:

• Electrical cable

• Water line–3/8" minimum copper tubing (including

ferrule and compression nut)

• Strain relief for electrical connection

• Hand shut-off valve (recommended)

• Air gap for drain hose, if required

• Waste tee for house plumbing, if applicable

• GPF10S drain hose (10' long), if needed

• Screw-type hose clamps

• Cord protector (power cord models only

as needed)

• Conversion leads (power cord models only

as needed)

TOOLS YOU WILL NEED:

• Phillips-head screwdriver

• 1/4" and 5/16" nutdriver

• 6" Adjustable wrench

• Level

• Carpenter's square

• Measuring tape

• Safety glasses

• Flashlight

• Bucket to catch water when flushing the line

• 15/16" socket (optional for skid removal)

• Gloves

• Pliers

For New Installations Only:

• Tubing cutter

• Drill and appropriate bits

• Hole saw set