Gdf 570-650 series; gdt 655-695 series; ddt 595 series; pdf 820 series; pdt 825-855 series; cdt 835-865 series; includes ge; ge profile; series and ge café series products (78 pages)
Page 1
GE Consumer & Industrial Appliances Installation Instructions Junction Box Cover Supplied Parts: Within this user bag, you will find a junction box cover and a #10 hex head screw used to attach the junction box cover to the bottom bracket or front brace (depending #10 Hex-Head Screw 1/2"...
Page 2
Service at 800.626.2000, 24 hours a day, 7 days a week. installer. Product failure due to improper installation is not oe ki ck covered under the GE Appliance Warranty. See the back cover If you received a damaged dishwasher, Attachment Screws of the Owners Manual for warranty information.
PREPARE DRAIN PLUMBING PREPARE DISHWASHER ENCLOSURE AND SINK LOCATION METHOD 1–Air Gap with Waste Tee or Disposer DRAIN REQUIREMENTS • Water line to sink faucet and drain from sink can be run • Sink opening for garbage disposer must be dimensioned as •...
If you need help with any of the following steps, call the washer wires (white, INSTALLATION INSTRUCTIONS: ® Water Line GE Answer Center Consumer Information Service, 800.626.2000 black and green) with Power the stripped ends. Using UL Listed wire nuts of appropriate size,...
INSTALLATION INSTRUCTIONS: continued INSTALLATION INSTRUCTIONS: continued Step 10 Step 15 Step 14 Align water and electrical lines Connect drain line Connect power supply Route the water line and electrical Follow all local codes and ordinances. Verify that power is turned off at source. If power cord is used, Locate the three dishwasher wires (white, black, and green) supply to their connection plug it into the wall outlet and go to Step 16.
Need help?
Do you have a question about the Spacemaker and is the answer not in the manual?
Questions and answers