Installation Preparation; Parts Supplied; Materials You Will Need; Tools You Will Need - GE Monogram ZBD6890KII Manual

Fully integrated built-in dishwasher

Hide thumbs

Table of Contents

Available languages

PARTS SUPPLIED:

Two #8-18 x 5/8" Phillips special head screws, to secure

dishwasher to underside of countertop or sides of

cabinets. (Taped to top side of dishwasher.)

Side and top trim pieces (on some models)

Template with mounting hardware (not shown)

for Model ZBD6890 Only

Drain Hose and Hose Clamp

MATERIALS YOU WILL NEED:

Ferrule, compression nut and 90° Elbow (3/8" NPT

external thread on one end, opposite end sized to fit

water supply)

Thread seal tape

UL Listed wire nuts (3)

Materials For New Installations Only:

Air gap for drain hose, if required

Waste tee for house plumbing, if applicable

Electrical cable or power cord, if applicable

Screw type hose clamps

Strain relief for electrical connection

Hand shut-off valve

Water line 3/8" min. copper

Coupler for extending drain line, if applicable

TOOLS YOU WILL NEED:

Phillips head screwdriver

5/16" and 1/4" nutdriver

6" Adjustable wrench

Level

Carpenters square

Measuring tape

Safety glasses

Flashlight

Bucket to catch water when flushing the line

15/16" socket (optional for skid removal)

Gloves

For New Installations Only:

Tubing cutter

Drill and appropriate bits

Hole saw set