Installation Preparation; Materials You Will Need; Tools You Will Need - GE Profile PDT750SMFES Installation Instructions Manual

Installation Preparation

PARTS SUPPLIED
IN INSTALLATION PACKAGE:
• Junction box cover and #10 hex-head screw
• Hose clamp
• Drain hose (approximately 78" long)
• Drain hose hanger
• 2 #8-18 hex head screws to secure brackets to washer
tub frame
• 1 top trim piece (on some models)
• 2 side trim pieces
• 2 mounting brackets for wood countertops or side
cabinets
• 2 #8-18 x 5/8" Phillips special head screws, to secure
dishwasher to underside of countertop or to side
cabinets
• Literature, samples and/or coupons

MATERIALS YOU WILL NEED:

• 90° elbow (3/4"hose internal thread on one end,
opposite end sized
to fit water supply)
• UL-listed wire nuts (3)
• Masking Tape
Materials Needed for New Installations:
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• Electrical cable or power cord depending on your
model, quick connect power cords are availble.
• Screw-type hose clamps
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Hot Water Line–3/8" minimum, copper tubing
(including ferrule, compression nut) or GE Part #
WX28X326, flexible braided hose.
• GPF12 or WD24X10065 drain hose (12' long), if needed

TOOLS YOU WILL NEED:

• Phillips-head screwdriver
• 1/4" and 5/16" nutdriver
• 6" Adjustable wrench
• Level
• Carpenter's square
• Measuring tape
• Safety glasses
• Flashlight
•
• 15/16" socket (optional for skid removal)
• Gloves
• Pliers
For New Installations Only:
• Tubing cutter
• Drill and appropriate bits
• Hole saw set
2
Junction
Box Cover
Top Trim Piece
(on some models)
Mounting
Brackets
90°Elbow
Waste Tee
Air Gap
Strain Relief
Phillips-Head
1/4" and 5/16"
Screwdriver
Nutdriver
15/16" Socket
Flashlight
Gloves
Bucket
#10
Hose Clamp
Hex-Head
Junction
Box Screw
1/2" long
Drain Hose Hanger
#8 Phillips
Special
Head Screws
Literature
5/8" long
Wire Nuts (3)
Masking Tape
(if applicable)
Electrical Cable
(or Power Cord, if applicable)
Hot Water Line
Hand
Valve
Level
Pliers
Tubing Cutter
6"
Adjustable
Wrench
Safety Glasses
Hole Saw Set
Drain Hose
#8 Hex-Head Mounting
Bracket Screws
Side Trim Pieces
Hose Clamps
Optional
12' Drain Hose
GPF12 or
WD24X10065
Carpenter's
Square
Measuring Tape
Drill and Bits