Wilson Electronics SIGNALBOOST MobilePro Installation Manual page 6

Installing a Wilson Outside Antenna on a Vehicle
To receive the best cell signal, select a location in the center of the vehicle's roof 12 inches
away from any other antennas and free of obstructions.
Follow the specifi c antenna installation instructions included with the outside antenna (sold
separately except for certain kits).
Carefully
Pull Down
Door Seal
5
Optional Magnet-
Mount Antenna
Shown
Run Cable
Under
Seal
The outside antenna must be installed
vertically. Signal performance will be
degraded if the antenna is not vertical.
The antenna cable may be run through the
door to the amplifi er.
!
Warning: The outside antenna and
amplifi er must have a separation of at least 8
inches from all persons during normal operation.
For a more professional-looking installation,
the antenna cable may be run under the
door seal. Carefully pull down the door
seal. Run the cable through the seal
and push the seal back into place. This
prevents constant wear and tear on the
cable as the door opens and closes.