Installation - NEC Express 5800 Series User Manual

BMC Configuration User's Guide
3.

Installation

3.1
BMC Configuration Installation for Windows
Explain the installation of BMC Configuration.
3.1.1
Check before installation
Check the followings:
-- See chapter 2 to check the system requirement.
-- Login to Windows as Administrator.
3.1.2
Start installation menu

If you install BMC Configuration by using downloaded modules:
After unzipping the downloaded modules, please execute the following file. BMC Configuration installation
will be started.
¥bmc_config¥setup.exe

If you install BMC Configuration by using EXPRESSBUILDER:
You can install BMC Configuration as follows:
(1) Insert EXPRESSBUILDER into the DVD drive on the managed server which Windows has
started. Autorun Menu will be displayed.
TIPS:

If Autorun Menu does not launch, double-click ¥autorun¥dispatcher.exe from
EXPRESSBUILDER. (x64 Edition : dispatcher_x64.exe)

If the device selection window is displayed, select the device you are using.
(2) In any of the following, BMC Configuration installation will be started.
-- Click [Applications] - [BMC Configuration] - [Install].
-- Click [Applications] - [BMC Configuration].
-- Click [Set up software] - [BMC Configuration].
TIPS:

Please refer to 7.1 BMC Configuration installation when you install it.