Battery Configuration - NEC Express 5800 Series User Manual

BMC Configuration User's Guide
4.4

Battery Configuration

If the managed server is equipped with a battery, you can check and configure the information of the battery.
CHECK:

Battery Configuration is not displayed if the managed server is not equipped with a battery.

Select Battery Configuration in Off-line TOOL.
4.4.1
Battery Pack Information
This screen displays the various information of the battery pack.
Item
Battery Pack Information
Status
Charge Status
Battery Pack Replacement
Remaining Charge
Full Charge Capacity
Rated Capacity
Description
Displays the information of the Battery Pack 1 and 2.
The detected state of the battery pack is displayed.
Normal / Warning / Error / Not Mounted
The charge status of the battery pack is displayed. *1
Fully Charged / Charging / Discharging(%) / Unknown
The necessity of the battery pack replacement is displayed. *1
Need / No Need
The remaining charge[mAh] of the battery pack is displayed. *1
Remaining Charge
: The remaining capacity for the Full Charge Capacity.
The full charge capacity[mAh] of the battery pack is displayed. *1
Full Charge Capacity
: The battery capacity that could be discharged to the voltage
at the end of discharge from full charge.
The rated capacity[mAh] of the battery pack is displayed. *1
Rated Capacity
: The minimum capacity of the battery pack based on the
charge and discharge conditions of JIS C8708 2007.