On Linux - NEC Express 5800 Series User Manual

BMC Configuration User's Guide
CHECK:

Battery Configuration is displayed at the following version when the managed server is
equipped with a battery.
- BMC Configuration for Windows Ver.1.30 or later

Monitoring is displayed at the following version when the managed server supports this
function.
- BMC Configuration for Windows Ver.1.41 or later
TIPS:

Refer to the following to see BMC Configuration help information.
- Click "BMC_Configuration" - "BMC Configuration Help"
from [start] on Windows.
4.1.2

On Linux

After the installation is completed, do the following operation as root user to open the setting function of
BMC Configuration.
/opt/nec/BMC_Configuration/bmcconf
TIPS:

Refer to the following to see BMC Configuration help information.
- Open the setting of BMC Configuration and press F12 key on the screen
displayed "[F12] help" at the bottom.
4.1.3
On Off-line TOOL
You can start the Off-line TOOL as follows.
(1) The following message is displayed on the bottom of POST screen.
Press<F2> SETUP, <F3> Internal flash memory, <F4> ROM Utility, <F12> Network
(2) Press F4 key on this screen. If F4 key is entered, Keyboard type selection screen is displayed after POST
screen, and the Off-line TOOL menu is displayed after selecting keyboard type.
(3) Select BMC Configuration.
TIPS:

Off-line TOOL is integrated in the managed server by default.

The Off-line TOOL menu is not displayed and BMC Configuration will start directory
according to the system.

Refer to the following to see help information.
- Start the tool and select Help menu, or press Home key or "?" key
on the screen displayed "[ Help:[Home or ?]]" at the bottom.