NEC Express 5800 Series User Manual page 38

BMC Configuration User's Guide
*7: It is not displayed when the system does not support this function.
*8: It is possible to set when Boot Time Configuration is "Enable".
*9: The range and value is different according to the system.
CHECK:

The ECO screen is not displayed if the managed server does not support this function.

In the case of EXPRESSSCOPE Engine SP3
Item
Proactive Mode *1
Proactive Mode
Power Threshold(Pa)
Alert Mode *4
Alert Mode
Power Threshold(Pn)
Description
Proactive Mode function brings the system power
consumption under the specified upper limit threshold
as the "Power Threshold(Pa)".
Select Enable/Disable of Proactive Mode.
Set the Power consumption upper limit threshold of
Proactive Mode. The range is from AAA to Maximum
Power Configuration.[Watt] *2 *3 *7
If the power consumption has been exceeded over the
"Power Threshold (Pn)" during the period specified in
the "Correction time limit", it will be able to generate
System Event Log and send alert.
Select Enable/Disable of Alert Mode.
Set the Power consumption upper limit threshold of
Alert Mode. The range is from Minimum Power
Configuration to BBB.[Watt] *5 *6 *7
Default Value
Disable
Maximum
Power
Configuration
[*7]
Disable
BBB - 10 or
Minimum
Power
Configuration +
10, whichever
is greater. [*7]