NEC Express 5800 Series User Manual page 72

BMC Configuration User's Guide
Item
Mail Alert
Alert
Response time of SMTP
server
Mail
To:1
Mail Address
To:2
Mail Address
To:3
Mail Address
From
Reply-To
Subject
SMTP Server
SMTP Server
SMTP Port
SMTP Authentication
CRAM-MD5
LOGIN
PLAIN
User Name
Password
Alert Level
Alert Level
Alert Test
*1: When Mail Alert is enabled, one or more of the addresses should be enabled.
*2: It is possible to set when To:X is "Enable".
*3: It is possible to set less than 255 half-size alphanumeric characters and "-(minus sign)", "_(underscore)",
".(period)", "@(at mark)".
*4: It is possible to set less than 63 half-size alphanumeric characters, except for "+", " "(quotation marks)",
"?", "=", "<", ">", "#" and "¥".
*5: It is possible to set full domain or IP Address less than 255 half-size alphanumeric characters and
"-(minus sign)", "_(underscore)", ".(period)".
*6: It is possible to set when SMTP Authentication is "Enable".
*7: When SMTP Authentication is enabled, one or more of the authentic method should be enabled.
*8: It is possible to set less than 64 half-size alphanumeric characters, except for " (space)", " "(quotation
marks)", "?" , "=", "<", ">", "#" and "¥".
*9: It is possible to set less than 19 half-size alphanumeric characters, except for " (space)", " "(quotation
marks)", "?" , "=", "<", ">", "#" and "¥".
*10: The Alert Level is as follows:
Alert Level
Error
Error/ Warning
Error/ Warning/ Information
Separate Setting
Description
Mail Alert setting
Select Enable/Disable of Mail Alert.
Set the timeout period until when the connection to
SMTP server succeed by E-mail transmission.
Mail Header setting
Select Enable/Disable of To:1. *1
Set the mail address of To:1. *2 *3
Select Enable/Disable of To:2. *1
Set the mail address of To:2. *2 *3
Select Enable/Disable of To:3. *1
Set the mail address of To:3. *2 *3
Set the From. *3
Set the Reply-To. *3
Set the Subject. *4
SMTP Server setting
Set the SMTP Server. *5
Set the SMTP Port.
Select Enable/Disable of SMTP Authentication.
Select Enable/Disable of CRAM-MD5. *6 *7
Select Enable/Disable of LOGIN. *6 *7
Select Enable/Disable of PLAIN. *6 *7
Set the SMTP User Name. *6 *8
Set the SMTP User Password. *6 *9
Alert Level setting
Set the kind of event to alert. *10
Execute the alert test by E-mail.
Description
When "Error" is detected in each sensor type, the alert is sent to the checked
address.
When "Error" or "Warning" is detected in each sensor type, the alert is sent to
the checked address.
When "Error", "Warning" or "Information" is detected in each sensor type, the
alert is sent to the checked address.
You can arbitrarily select the event and the address(To:X) to alert in each
sensor type.
Default Value
Disable
30
Enable
Blank
Disable
Blank
Disable
Blank
Blank
Blank
Blank
0.0.0.0
25
Disable
Enable
Enable
Enable
Blank
Blank
Error/ Warning