Clear Bmc Sel - NEC Express 5800 Series User Manual

BMC Configuration User's Guide
4.7

Clear BMC SEL

If you select "Clear BMC SEL" on the menu of BMC Configuration, you can clear all records of System
Event Log.
4.8
BMC Configuration Initialization
If you select "BMC Configuration Initialization" on the starting screen, you can restore all of BMC
Configuration parameters to the default settings except for the part. It will take a few minutes to restart BMC.
IMPORTANT:

This operation may cause data destruction.

False HW error information may be detected on the server if Shutdown, Reboot, or any
other operation is executed during a few minutes after this operation. Please refer to the
server's User's Guide to get more information, because the occurrence of the false HW error
detection depends on the model of the server.
CHECK:

The initialization of the ECO settings is supported the following version.
- BMC Configuration for Windows Ver.1.21 or later

If the managed server is equipped with a battery, this item appears in "BMC/Battery
Configuration Initialization" and the Battery settings are also initialized.
4.9
Reset BMC
If you select "Reset BMC" on the menu of BMC Configuration, you can reset BMC without rebooting
system. It will take a few minutes to restart BMC.
IMPORTANT:

Please use it when you can not operate the BMC functions correctly or if necessary.

This operation does not clear the configuration settings.

False HW error information may be detected on the server if Shutdown, Reboot, or any
other operation is executed during a few minutes after this operation. Please refer to the
server's User's Guide to get more information, because the occurrence of the false HW error
detection depends on the model of the server.