Restore - NEC Express 5800 Series User Manual

BMC Configuration User's Guide
5.4

Restore

Restore the system information from files. Select the restore target and click [OK].
Item
File Locations
Backup File
Browse
Restore Target
FRU Information
include UUID
BIOS Information
BMC Information
*1: When you restore UUID, BMC will be reset. In this case, it will take a few minutes to restart BMC.
To reflect the setting, it is necessary to reboot the server.
IMPORTANT:

This operation may cause data destruction. Other than the maintenance person, please do
not run.

False HW error information may be detected on the server if Shutdown, Reboot, or any
other operation is executed during a few minutes after this operation. Please refer to the
server's User's Guide to get more information, because the occurrence of the false HW error
detection depends on the model of the server.
CHECK:

You need backup file in the Backup function.

Off-line TOOL has no restore function.
Description
Set the locations of file.
The backup file is displayed.
It changes the backup file.
Select the restore target.
Select whether restore FRU Information or not. Only when the target
information exists in the file, you are able to select this item.
When you restore FRU Information, select whether restore UUID or not.
Only when FRU Information is selected and the target information exists in
the file, you are able to select this item. *1
Select whether restore BIOS Information or not. Only when the target
information exists in the file, you are able to select this item.
Select whether restore BMC Information or not. Only when the target
information exists in the file, you are able to select this item.