Battery Controller Information - NEC Express 5800 Series User Manual

BMC Configuration User's Guide
4.4.2

Battery Controller Information

This screen displays the various information of the battery controller.
Item
Battery Controller Information
Manufacturer Name
Device Name
Firmware Revision
Supported Battery Type
Approximate Backup Time at
Full Charge(current load)
Approximate Backup Time at
Full Charge(maximum load)
Rated Capacity
Rated Power
Peak VA
Charged Power
*1: If the approximate backup time is unknown, "-" is displayed.
*2 'Approximate Backup Time at Full Charge' is a reference value when the server's environment
temperature is 25 degrees Celsius. This value may be different from actual operating time caused by
temperature differences.
Description
Displays the information of the Battery Controller.
The manufacturer name of the battery controller is displayed.
The device name of the battery controller is displayed.
The firmware revision of the battery controller is displayed.
The type of the battery controller is displayed.
The approximate backup time[minutes:seconds] in fully charged
state at current load of the battery controller is displayed. *1 *2
The approximate backup time[minutes:seconds] in fully charged
state at maximum load of the battery controller is displayed. *1 *2
The rated capacity[mAh] of the battery controller is displayed.
Rated Capacity
: The minimum capacity of the battery controller based on the
charge and discharge conditions of JIS C8708 2007.
The rated power[W] of the battery is displayed.
The peak power[W] of the battery is displayed.
The power[W] required for charging is displayed.