NEC Express 5800 Series User Manual page 47

BMC Configuration User's Guide
Item
Cooling
BBU(*1) on PCI Slot
Fault Handling
Degraded Server
Policy
Failing Unit Removal
FRB2 Monitoring
POST Monitoring *3
Boot Monitoring *3
OpROM Monitoring *3
Failure Flow Monitoring *3
Shutdown Monitoring *3
Diagnostics *2
Periodic Diagnosis
Configuration *2
Master Clock Module
Spare Memory Configuration
Mode
Spare PCIe Configuration
Mode
*1: Battery Backup Unit for SAS Card
*2: It is not displayed when the system does not support this function.
*3: This item only exists in Off-line TOOL. It is displayed when the system supports this function.
CHECK:

This setting is applied at the next booting time of the managed server.
Description
Cooling function setting
Select the cooling function of the BBU(*1).
Not -Installed
Installed
Fault Handling function setting
Boot Select the Degraded Server Boot Policy.
Boot
Not-Boot
Select Enable/Disable of Failing Unit Removal.
Enable
Disable
Select Enable/Disable of FRB2 Monitoring.
Enable
Disable
Select Enable/Disable of POST Monitoring.
Enable
Disable
Select Enable/Disable of Boot Monitoring.
Enable (Set time [Min])
Disable
Select Enable/Disable of OpROM Monitoring.
Enable
Disable
Select Enable/Disable of Failure Flow Monitoring.
Enable (Set time [Min])
Disable
Select Enable/Disable of Shutdown Monitoring.
Enable (Set time [Min])
Disable
Diagnostics function setting
Select Enable/Disable of Periodic Diagnosis.
Enable
Disable
Various other setting
Select the Master Clock Module.
Clock1
Clock2
Select the Spare Memory Configuration Mode.
Static
Dynamic
Select the Spare PCIe Configuration Mode.
Static
Dynamic
Default Value
Not -Installed
Not-Boot
Enable
Enable
Enable
Disable
Disable
Disable
Disable
Enable
Clock1
Static
Static