Table of Contents
Advertisement
B. Clearances to Combustibles
When selecting a location for the appliance it is important
to consider the required clearances to walls. See Figure
3.4.
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be lo-
cated out of traffic and away from furniture and draperies.
E
1/2 IN.
(13 mm)
A
SLR-X-AU
Millimeters
Figure 3.3 Appliance Locations
10
A
C
TOP VENT
ONE 90
ELBOW
0
Refer to Section 10.C for mantel and wall
projection information.
Consider the mantel or cabinet system to be
installed and comply with the necessary
requirements for elevated hearth. Refer to
instructions included with cabinet system.
A
B
Inches
50-1/2
49
1283
1245
Heat & Glo • SLR-X-AU Installation Manual • 2493-980 Rev. B • 12/17
NOTICE: Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation could vary due
to individual design preference.
It is important to follow the framing and finishing instruc-
tions step by step to ensure proper placement of fireplace
in the surrounding framing/finishing materials.
D*
ALCOVE
INSTALLATION
TOP VENT
ONE 90° ELBOW
B
C
71-1/2
See Section 10.B for Alcove Installation.
1816
F
D
19-1/2
E
F
17-1/4
495
438
Advertisement
Table of Contents
