Power Management - Aaeon ITP11 User Manual

3.3.7 Dynamic Digital IO
The items in this menu allow you to modify Digital IO settings.
GPIO1~3 Direction [Input]
Set GPIO data flow as Input or Output. Configuration options: [Input] [Output]
GPO0~3 Direction [Output]
Set GPO0 data flow as Input or Output. Configuration options: [Input] [Output]
Output Level [Hi]
Configuration options: [Hi][Low]
3.3.8

Power Management

Power Mode [ATX Type]
Select power supply mode. Configuration options: [ATX Type] [AT Type]
Power Failure [Last State]
Select AC power loss/failure response. Configuration options: [Last State] [Always
On] [Always Off]
ERP Function [Enabled]
This item disables/enables ERP mode for energy star compliance.
Configuration options: [Disabled] [Enabled]
Resume from RI [Enabled]
This item disables/enables Resume from RI.
Configuration options: [Disabled] [Enabled]
3-6
EMB-KB1