Aaeon ITP11 User Manual page 35

3.3.6 F81866 H/W Monitor
The items in this menu allow you to configure hardware monitoring settings.
Smart Fan Function [Enabled]
Allows you to enable or disable Smart Fan Function. Configuration options:
[Enabled] [Disabled]
Smart Fan Mode Configuration
Fan 1~2 Smart Fan Control [Auto Duty-Cycle Mode]
Select Smart Fan mode. Configuration options: [Auto Duty Cycle Mode]
[Manual RPM Mode] [Manual Duty Mode] [Auto RPM Mode]
Temperature 1~4
Input temperature value to configure fan control. Input value range: [1~100]
Duty Cycle 1~4
Input duty cycle to configure fan control. Input value range: [1~100]
The following item replaces Duty Cycle when Smart Fan Control is set to Auto
RPM Mode.
RPM Percentage 1~4
Input RPM percentage to configure fan control. Input value range: [1~100]
Manual Duty Mode [60]
Input duty cycle value for PWM fan. Input value range: [1~100]
Manual Duty Mode is the only available item when Smart Fan Control is set to
Manual Duty Mode.
Manual RPM Mode [2000]
Input RPM count value for PWM fan. Input value range: [500~10000]
Manual RPM Mode is the only available item when Smart Fan Control is set to
Manual RPM Mode.
Chapter 3: BIOS setup
3-5