Table of Contents
Advertisement
5.
Serial ATA 6.0Gb/s connector (7-pin SATA6G_1, SATA6G_2)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
EMB-KB1 SATA 6.0Gb/s connectors
IMPORTANT:
•
•
6.
SATA power connector (4-pin SATA_PWR1)
This connector is for the SATA power cable. The power cable plug is
designed to fit this connector in only one orientation. Find the proper
orientation and push down firmly until the connector completely fit.
EMB-KB1 SATA POWER Connector
2-18
GND
RSATA_RXP2
RSATA_RXN2
GND
RSATA_TXN2
RSATA_TXP2
GND
You must install Windows
Serial ATA hard disk drives.
When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.3 IDE Configuration for details.
SATA_PWR1
GND
RSATA_TXP1
RSATA_TXN1
GND
RSATA_RXN1
RSATA_RXP1
GND
XP Service Pack 3 or later version before using
®
+12V
GND
GND
+5V
EMB-KB1
Advertisement
Table of Contents
