Table of Contents
Advertisement
FIGURE 4
7
7
IONS
DESCRIPTION
EASE FOR PATENT
FIGURE 5
6
6
Lift and Flip
FIGURE 7
Step 2 Hardware
7
STEP 2
Assemble Pedals
Pull Handle
6
6
FIGURE 6
5
5
Pedal Installation
• Locate the Seat Post and raise it to the highest position
by pulling up on the Seat Handle (Figure 4).
Use caution to avoid tipping and when lifting heavy objects.
• To have better access while installing the pedals, position
the FreeStep
Front Crossbar and rotating on the Rear Stabilizer until the
Seat Post is resting on the ground (Figure 5 and Figure 6).
• Locate the Pedals, noting Right and Left markings. Insert
both Pedals onto the corresponding Base Pedal Arm
(Figure 7).
• Use the Step 2 Hardware Kit to attach the Pedals.
Hand tighten 4 × Large Bolts with 4 × Curved Washers and
4 × Nuts with 4 × Curved Washers as shown (Figure 8).
The Curved Washers should wrap around the shape of the
Base Pedal Arm and Pedal Mount Tube.
• Proceed to hand tighten 4 × Bolts with 4 × Washers as
shown (Figure 8). Proceed to fully tighten all the nuts and
bolts with Allen and Box-Ended wrenches (Figure 8).
4
4
3
3
• Once the Pedals are installed, return the FreeStep
the upright position by lowering the Front Crossbar and
rotating on the Rear Stabilizer.
FIGURE 8
Curved Washer
CAUTION
!
5
5
™
to rest on its back side by lifting up on the
2
2
ITEM QTY
NET DIMENSIONS/DESCRIPTION
Nut
10
109
Bolt
108
4
4
1
1
PARTS LIST
to
™
NOTE
MATE
Large Bolt
111
Hide quick links:
Advertisement
Table of Contents
