FIGURE 21
The Right and Left Handles are
assembled correctly.
11
Assemble Handles
CORRECT
STEP 6
Handle Installation
• Loosen the Handle Adjustment Knobs on the right and left
Handle Support Tubes by turning the knobs counter-clockwise,
then pulling outward (Figure 21).
• Locate the Handles, noting Right and Left markings. With the
top of the handles pointing outward, insert both Handles into
the corresponding Handle Support Tube. Adjust Handles as
desired and tighten Handle Adjustment Knobs by releasing into
a hole setting and then rotating clockwise (Figure 21).
The Right and Left Handles are
switched and need to be corrected.
INCORRECT