Printronix L1524 Operator's Manual page 43

Ozone Filter
The ozone filter must be replaced every
time the developer unit is replaced.
Refer to the adjacent figure and perform
these steps:
Raise the top of the printer by firmly
pressing the button on the left of the
front panel.
2
Pull the old ozone filter, by its tab,
up and out of the printer and
discard it.
3
Remove the new ozone filter from
the plastic bag.
4
Hold the new ozone filter by its tab
and place the filter into the slot
inside the printer.
5
Close the top cover of the printer.
Operator's Guide
replacing printer consumables
Ozone Filter
33