Printronix L1524 Operator's Manual page 24

clearing paper jams
Jam at Fuser Exit
The fuser operates at extremely high
temperature. Avoid touching the fuser.
Refer to the adjacent figure and perform
these steps:
Raise the top of the printer by firmly
pressing the button on the left side
of the front panel.
2
Tear the paper at a perforation
between the OPC drum unit and the
fuser unit.
3
Open the rear cover of the fuser
unit by rotating it back and down.
Pull the jammed paper toward the rear
cover of the fuser unit only. Pulling the
paper back over the rollers may damage
the top of form sensor.
Be careful not to scratch or nick the
rollers when removing the jammed
paper.
4
Carefully pull the jammed paper
from between the fuser roller and
the pressure roller.
5
Close the rear cover of the fuser
unit.
6
Reload the paper. Refer to the
"Loading Paper" section.
7
Close the top cover of the printer
and wait for the printer to warm up.
8
Press ON LINE. Printing will
resume.
14
warning
OPC Drum
caution
Fuser Roller
Pressure Roller
Perforation
Fuser Unit
Paper
Jam
Rear Cover
Operator's Guide