Printronix L1524 Operator's Manual page 23

After removing the jammed paper,
reload paper as described in the
"Loading Paper" section. To clear the
printer, close the top cover and press
ON LINE. For most emulation modes,
the jammed pages will automatically be
reprinted. After printing, verify that no
pages remain unprinted.
If a paper jam occurs while running
either a test print or a configuration
printout, pressing online is not
necessary to resume printing.
Jam at Fuser Input
The fuser operates at extremely high
temperature. Avoid touching the fuser.
Refer to the adjacent figure and perform
these steps:
Raise the top of the printer by firmly
pressing the button on the left side
of the front panel.
2
Tear off the paper at the perforation
nearest the OPC drum unit and
remove the paper.
3
Reload the paper. Refer to the
"Loading Paper" section.
4
Close the top cover of the printer
and wait for the printer to warm up.
5
Press ON LINE. Printing will
resume.
Operator's Guide
clearing paper jams
warning
Loose Toner
OPC Drum
Perforation
Paper
Jam
13