Printronix L1524 Operator's Manual page 13

Using the Control Panel
If your self adhesive control panel
overlay has not been attached, please
attach it. The printer is shipped with a
thin plastic film covering the control
panel plastic housing keys. This film
must be removed before attaching the
overlay. Remove the backing from the
control panel overlay and apply the
overlay to the control panel.
The control panel, located on the front
right side of the printer, consists of the
following:
An LCD with two lines of 16 characters
each
Three indicators
Seven function keys
The LCD, indicators, and function keys
are described in the following sections.
Refer to the Setup Guide for specific
configuration procedures and
information regarding the configuration
menu structure.
The function keys permit you to
configure the options of the printer. You
can access these selections via a
structured menu of options and values
which are presented through messages
on the LCD. To navigate through the
options, use the UP, DOWN, NEXT, and
PREV keys. Press ENTER to select an
option that appears on the LCD.
The enter key can be locked and
unlocked. The power up default is
"locked."
A detailed overview of the configuration
menu structure is provided in the Setup
Guide.
Operator's Guide
Check Indicator
On Line
Indicator
LCD
Job In
Process
Indicator
3