Software Error Message Display - Miller Axcess E Dual Owner's Manual

8-5. Software Error Message Display

1. During the initial power up sequence, the ARM checks the UIM, WFCM and RIO for software numbers or
revisions and compares them to what is stored to see if they are compatible. If these software versions are not
compatible, the ERR S W will appear on the display (see Figure 8-3). Compatible software can be downloaded
from www.MillerWelds.com.
2. After supplying information on the web site and resolving any software issues, the unit as a system should now be
operational.
ERR
1
Program
Volts
S W
WFS
Process
Wire Type
Gas Type
Process Set up
Figure 8-3. Feeder Display For Software Version Issues
Time Arc Adjust
Amps Arc Ctl
Sequence
Trigger Control
Trigger Hold
Adjust Feeder Set Up
OM-248965 Page 47