Table of Contents
Advertisement
Speaker
Description
Speaker kit (includes speaker and cables)
Before removing the speaker, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
5.
Remove the back cover (see
6.
Remove the battery (see
7.
Remove the middle frame cover (see
Remove the speaker:
1.
Remove the 4 Phillips M00x 5.0 screws (1) securing the speaker to the frame.
2.
Disconnect the speaker cable (2) from the system board.
3.
Remove the plastic protective tape (3), and then carefully route the cable (4) through the routing
channels and under the ribbon cable.
Card tray on page
14).
Back cover on page
15).
Battery on page
16).
Middle frame cover on page
Spare part number
926164-001
17).
Speaker
21
Advertisement
Table of Contents
