Table of Contents
Advertisement
3.
Insert a thin tool (3) in the thin side of the frame to release the snaps securing the frame, and then
remove the frame.
Reverse this procedure to install the middle frame cover.
Rear-facing webcam
Description
Rear-facing webcam (includes cable)
Before removing the rear-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
5.
Remove the back cover (see
6.
Remove the battery (see
7.
Remove the middle frame cover (see
Remove the rear-facing webcam:
1.
Disconnect the rear-facing webcam cable (1) from the system board.
18
Chapter 5 Removal and replacement procedures
Card tray on page
14).
Back cover on page
15).
Battery on page
16).
Middle frame cover on page
Spare part number
926166-001
17).
Advertisement
Table of Contents
