Table of Contents
Advertisement
4.
Remove the tray (2) from the voice tablet.
Reverse the steps to replace the tray.
NOTE:
Be sure the card tray access hole is aligned with the access hole on the tablet before replacing the
tray.
Back cover
Description
Back cover (includes camera lens)
Back cover with logo (includes camera lens)
Before removing the back cover, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down
through the operating system.
2.
Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the card tray (see
Remove the back cover:
CAUTION:
Before turning the voice tablet screen facedown, be sure that the work surface is clear of tools,
screws, and any other foreign objects. Failure to follow this caution can result in damage to the screen.
1.
Place the tablet on a flat surface, screen facedown.
2.
Use a plastic pry tool (1) in the space between the back cover and screen, above the power on button.
3.
Slide the tool (2) clockwise around the tablet to release the 18 plastics snaps securing the back cover to
the display panel assembly.
Card tray on page
14).
Spare part number
926157-001
937866-001
Back cover
15
Advertisement
Table of Contents
