Table of Contents
Advertisement
11.
Lift the rear edge of the system board (3) until it rests at an angle, and then remove
the system board by sliding it up and back at an angle.
Reverse this procedure to install the system board.
Rear-facing webcam
Description
5.0-MP, auto-focus, rear-facing webcam (includes cable and double-sided adhesive)
Before removing the rear-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the top and bottom covers (see
5.
Remove the display panel assembly (see
6.
Remove the system board (see
Top and bottom covers on page
Display panel assembly on page
System board on page
Spare part number
775656-001
15).
16).
27).
Rear-facing webcam
29
Advertisement
Table of Contents
