Table of Contents
Advertisement
Rear-facing webcam
Description
5.0-MP, auto-focus, rear-facing webcam (includes cable and double-sided adhesive)
2.0-MP, fixed-focus, rear-facing webcam (includes cable and double-sided adhesive)
Before removing the rear-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the SIM slot cover (see
5.
Remove the back cover (see
6.
Remove the middle frame (see
7.
Disconnect the battery cable from the system board (see
Remove the rear-facing webcam:
1.
Disconnect the rear-facing webcam cable (1) from the system board.
2.
Detach the rear-facing webcam (2) from the display panel assembly. (The rear-facing webcam is
attached to the display panel assembly with double-sided adhesive.)
3.
Remove the rear-facing webcam and cable.
24
Chapter 5 Removal and replacement procedures
SIM slot cover on page
Back cover on page
14).
Middle frame on page
Spare part number
791010-001
781990-001
13).
16).
Battery on page
19).
Advertisement
Table of Contents
