Rear-Facing Webcam - HP Pro Tablet 408 G1 Maintenance And Service Manual

Rear-facing webcam

Description
8.0-MP, auto-focus, rear-facing webcam (includes cable and double-sided adhesive)
Before removing the rear-facing webcam, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the middle frame and battery (see
Remove the rear-facing webcam:
1. Turn the middle frame upside down with the volume control buttons facing away.
2. Release the ZIF connector (1) to which the rear-facing webcam is attached, and then disconnect the
rear-facing webcam cable from the system board.
3. Detach the rear-facing webcam cable (2) from the system board. (The rear-facing webcam cable is
attached to the system board with double-sided adhesive.)
4. Remove the rear-facing webcam (3).
Reverse this procedure to install the rear-facing webcam.
Back cover on page 14).
Middle frame and battery on page
Spare part number
805087-001
15).
Rear-facing webcam 19