Dodge Journey 2018 User Manual page 99

Hide thumbs Also See for Journey 2018:
Table of Contents

Advertisement

Locating The LATCH Anchorages
The lower anchorages are round bars that are
found at the rear of the seat cushion where it
meets the seatback. They are just visible when
you lean into the rear seat to install the child
restraint. You will easily feel them if you run your
finger along the gap between the seatback and
seat cushion.
Rear Seat Lower Anchorages (Second
Row 60/40)
Locating The Upper Tether Anchorages
There are tether strap anchorages behind each
second row seating position, located on the
back of the seat, near the floor.
Tether Anchorages (Second Row 60/40)
LATCH-compatible child restraint systems will
be equipped with a rigid bar or a flexible strap
on each side. Each will have a hook or connector
to attach to the lower anchorage and a way to
tighten the connection to the anchorage.
Forward-facing child restraints and some rear-
facing child restraints will also be equipped with
a tether strap. The tether strap will have a hook
at the end to attach to the top tether anchorage
and a way to tighten the strap after it is attached
to the anchorage.
Center Seat LATCH
This vehicle has 5 lower LATCH anchorages in
the rear seat. Anchorages A and B are used for
the right outboard position behind the front
passenger (1). Anchorages D and E are used for
the left outboard position behind the driver (3).
Anchorages B and C are used for the center
seating position (2). Do not install a LATCH-
compatible child restraint using anchorages C
and D. This is not a LATCH-compatible position
in your vehicle.
97

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Journey 2018

Table of Contents