Dodge Journey 2018 User Manual page 94

Integrated Child Booster Seat — If
Equipped
The Integrated Child Booster Seat is located in
each outboard second-row passenger seat.
WARNING!
DEATH or SERIOUS INJURY can occur,
• Follow all instructions on the child re-
straint and in the vehicle's owner's
manual.
• The second row bench with Integrated
Child Booster Seat must remain in the full
rear position during use.
• Use only with children who weigh between
48 and 85 pounds (22 and 39 kg) and
whose height is between 47 and 57 in
(119 and 145 cm).
To position a child into the Integrated Child
Booster Seat follow these steps:
1. Slide the second row seat to the full rear
position to use the Integrated Child Booster
Seat.
92
NOTE:
The second row bench with Integrated Child
Booster Seat must remain in the full rear
position during use.
2. Pull the release loop forward to release the
latch and seat cushion.
Release Loop
3. Lift the seat cushion up and push back to
lock it in the booster seat position.
Booster Seat
4. Place the child upright in the seat with their
back firmly against the seatback.
5. Grasp the latch plate and pull out the seat
belt.
6. Slide the latch plate up the webbing as far as
necessary to allow the seat belt to go around
the child's lap.
NOTE:
The lap portion of the seat belt should be low
on the hips and as snug as possible.