Dodge Journey 2018 User Manual page 128

5. After 25 miles (40 km), check the lug nut
torque with a torque wrench to ensure that
all lug nuts are properly seated against the
wheel.
Spare Tire Stowage
NOTE:
Refer to "Spare Tire Location And Removal" for
information on assembling the winch tools.
BULB REPLACEMENT
Replacement Bulbs
Interior Bulbs
Courtesy/Reading Lamps (Incandescent)
Courtesy/Reading Lamps (Optional LED)
Glove Compartment Lamp
Cargo Lamp
Optional Door Map Pocket/Cupholder
For lighted switches, see your authorized dealer for replacement instructions.
126
1. Place the spare tire near to the winch cable.
Hold the spare upright so that the tire's tread
is on the ground and the valve stem is at the
top of the wheel facing away from the rear of
the vehicle.
2. Tilt the retainer at the end of the winch cable
and drop it through the center of the wheel.
Then place the spare tire with the cable and
retainer underneath the vehicle.
3. Fit the assembled jack-handle over the
winch drive nut. Rotate the jack-handle as-
sembly clockwise to raise the spare tire into
the storage area. Continue to rotate the jack-
handle assembly until you hear the winch
mechanism click three times. It cannot be
over tightened. Push against the tire several
times to be sure it is held securely in place.
Bulb Number
578
LED (Serviced at authorized dealer)
194
579
LED (Serviced at authorized dealer)