Dodge Journey 2018 User Manual page 190

Operation Of The Remote
The remote control operates similarly to any
DVD remote you have used before and allows
the rear seat passengers to change stations,
tracks, discs and audio/video modes and is
designed to control either channel by using the
selector switch located on the right side of the
remote.
• Select an audio channel (Rear 1 for driver's
side rear screen and Rear 2 for passenger's
side rear screen), then press the "source"
button and using the up and down arrows,
highlight disc from the menu and press the
"OK" button.
• Press the popup/menu button to navigate the
disc menu and options.
Pressing the MODE button causes the Mode
Selection menu to appear on the VES screen.
Use the remote control arrow buttons to scroll
through the available modes, then press ENTER
to select the desired mode.
Pressing the power button will turn the VES
system ON/OFF.
188
Auxiliary Audio/Video Input Jacks
• The Aux jacks are located on the rear of the
center console.
• Connect the video game or other external
media devices to the AUX jacks following the
color coding for VES jacks.
• Using either the touchscreen radio or remote
control, select AUX from the Rear VES Control
or Mode Selection screen.
• Refer to your vehicle's Owner's Manual at
www.mopar.com/en-us/care/
owners-manual.html (U.S Residents) or
www.owners.mopar.ca (Canadian Residents)
for further details.
NAVIGATION
• The information in the section below is only
applicable if you have the Uconnect 3NAV
system or the Navigation has been activated
on your Uconnect 3 with 8.4–inch display
system.
Press the "Nav" button on the touchscreen in
the menu bar to access the Navigation system.
Navigation Overview
Uconnect 3/3 NAV With 8.4–inch Display Radio
integrates Garmin's consumer-friendly naviga-
tion into your vehicle. Garmin Navigation in-
cludes Lane Assist and Junction View, Speed
Limit information, and a database with over six
million points of interest.
• Press the "Nav" button on the touchscreen in
the menu bar to access the Navigation
system.
Changing The Navigation Voice Prompt Volume
1. Program a destination.
2. While traveling on your route, press the up-
per left area of the map screen where your
next turn is displayed.
3. The Navigation system will then repeat the
distance to your next turn.
4. While the Navigation system is speaking,
use the ON/OFF VOLUME rotary knob to
adjust the volume to a comfortable level.
Please note the volume setting for Naviga-
tion Voice Prompt is different than the audio
system.