Dodge journey 2017 Owner's Manual
Hide thumbs Also See for journey 2017:
Table of Contents

Advertisement

Quick Links

Journey
2 0 1 7
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading

Summary of Contents for Dodge journey 2017

  • Page 1 Journey 2 0 1 7 O W N E R ’ S M A N U A L...
  • Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
  • Page 3: Introduction 3

    TABLE OF CONTENTS SECTION PAGE INTRODUCTION ..............3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
  • Page 5: Table Of Contents

    INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL .
  • Page 6: Introduction

    4 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL Congratulations on selecting your new FCA US LLC ve- Consult the Table of Contents to determine which section hicle. Be assured that it represents precision workmanship, contains the information you desire. distinctive styling, and high quality. Since the specification of your vehicle depends on the items This Owner’s Manual has been prepared with the assis- of equipment ordered, certain descriptions and illustra-...
  • Page 7: Warnings And Cautions

    INTRODUCTION 5 WARNINGS AND CAUTIONS procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss This Owner’s Manual contains WARNINGS against oper- important information. Observe all Warnings and Cau- ating procedures that could result in a collision, bodily tions.
  • Page 8: Vehicle Identification Number

    6 INTRODUCTION VEHICLE IDENTIFICATION NUMBER The Vehicle Identification Number (VIN) is on the left front corner of the instrument panel and is visible from outside of the vehicle through the windshield. This number also appears stamped on the right front door sill under the sill moulding and printed on the Automobile Information Disclosure Label affixed to a window on your vehicle, the vehicle registration and title.
  • Page 9 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ....9 ILLUMINATED ENTRY ....15 ▫...
  • Page 10 8 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ To Exit Remote Start Mode And Drive The OCCUPANT RESTRAINT SYSTEMS ...34 Vehicle .......21 ▫...
  • Page 11: A Word About Your Keys

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9 A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system includes a key fob and a Keyless Push Button Ignition. Keyless Push Button Ignition This feature allows the driver to operate the ignition with the push of a button as long as the key fob is in the passenger compartment.
  • Page 12: Ignition Or Accessory On Message

    10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE emergency key is also for locking the glove compartment. Ignition Or Accessory On Message You can keep the emergency key with you when valet Opening the driver’s door when the ignition is in ACC or parking.
  • Page 13: General Information

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 General Information WARNING! (Continued) The following regulatory statement applies to all Radio • Allowing children to be in a vehicle unattended is Frequency (RF) devices equipped in this vehicle: dangerous for a number of reasons. A child or others could be seriously or fatally injured.
  • Page 14: Replacement Key Fobs

    12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE vehicle operation. Therefore, only key fobs that are pro- CAUTION! (Continued) grammed to the vehicle can be used to start and operate the • The Sentry Key Immobilizer System is not compat- vehicle.
  • Page 15: Customer Key Fob Programming

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 NOTE: Duplication of key fobs may be performed at an NOTE: Changes or modifications not expressly approved authorized dealer. This procedure consists of programming by the party responsible for compliance could void the a blank key fob to the vehicle electronics.
  • Page 16: To Arm The System

    14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Arm The System To Disarm The System Follow these steps to arm the vehicle security alarm: The vehicle security alarm can be disarmed using any of the following methods: 1. Make sure the vehicle ignition system is OFF (refer to •...
  • Page 17: Security System Manual Override

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 NOTE: Security System Manual Override • The driver’s door key cylinder and the liftgate button on The vehicle security alarm will not arm if you lock the the key fob cannot arm or disarm the vehicle security doors using the manual door lock plunger.
  • Page 18: Remote Keyless Entry - Passive Entry

    16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY — PASSIVE ENTRY To Unlock The Doors And Liftgate The Remote Keyless Entry system allows you to lock or Push and release the unlock button on the key fob once to unlock the doors, open the liftgate, or activate the Panic unlock the driver’s door or twice within five seconds to Alarm from distances up to approximately 66 ft (20 m)
  • Page 19: To Lock The Doors And Liftgate

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 Headlight Illumination On Approach Using The Panic Alarm This feature activates the headlights for up to 90 seconds To turn the Panic Alarm feature on or off, push and hold when the doors are unlocked with the key fob. The time for the Panic button on the key fob for at least one second and this feature is programmable on vehicles equipped through release.
  • Page 20: Key Fob Battery Replacement

    18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key Fob Battery Replacement The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit board.
  • Page 21: General Information

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 General Information The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
  • Page 22: How To Use Remote Start

    20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • The vehicle must be equipped with an automatic trans- • Do not start or run an engine in a closed garage or mission to be equipped with Remote Start. confined area.
  • Page 23: To Enter Remote Start Mode

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 To Enter Remote Start Mode NOTE: To avoid unintentional shutdowns, the system will disable the one time push of the remote start button for two Push and release the remote start button on the key fob seconds after receiving a valid Remote Start request.
  • Page 24: General Information

    22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle: This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.
  • Page 25: Power Door Locks

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 Power Door Locks WARNING! A power door lock switch is on each front door trim panel. • For personal security and safety in the event of a Use this switch to lock or unlock the doors and liftgate. collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
  • Page 26: Child-Protection Door Lock System - Rear Doors

    24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Turning off the ignition or closing the door will allow the 4. Any vehicle door is opened. locks to operate. If a door is open, and the ignition is in the 5. The doors were not previously unlocked. ON/RUN or ACC position, a chime will sound as a reminder to remove the key fob.
  • Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Child-Protection Door Lock Location Child-Protection Door Lock Function 3. Repeat steps 1 and 2 for the opposite rear door. NOTE: When the Child-Protection Door lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
  • Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Disengage The Child-Protection Door Lock WARNING! System Avoid trapping anyone in a vehicle in a collision. 1. Open the rear door. Remember that the rear doors can only be opened from 2.
  • Page 29: Keyless Enter-N-Go - Passive Entry (If Equipped)

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 KEYLESS ENTER-N-GO — PASSIVE ENTRY To Unlock From The Driver’s Side: (IF EQUIPPED) With a valid Passive Entry key fob within 5 ft (1.5 m) of the The Passive Entry system is an enhancement to the vehi- driver’s door handle, grab the driver’s front door handle to cle’s Remote Keyless Entry (RKE) system and a feature of unlock the driver’s door automatically.
  • Page 30 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side: doors and chirps the horn three times (on the third attempt ALL doors will lock and the Passive Entry key fob can be With a valid Passive Entry key fob within 5 ft (1.5 m) of the locked in the vehicle).
  • Page 31 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 To Lock The Vehicle’s Doors: With one of the vehicle’s Passive Entry key fobs within 5 ft (1.5 m) of the driver or passenger front door handle, push the door handle lock button to lock all four doors and liftgate.
  • Page 32: General Information

    30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The Passive Entry system will not operate if the key fob WINDOWS battery is dead. Power Windows The vehicle doors can also be locked by using the key fob The window controls on the driver’s door trim panel lock button or the lock button located on the vehicle’s control all of the door windows.
  • Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 NOTE: For vehicles equipped with Uconnect, the power To stop the window from going all the way down during window switches will remain active for up to 10 minutes the Auto-Down operation, pull up on the switch briefly. after the ignition is cycled to the OFF position.
  • Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Switch WARNING! The window lockout switch on the driver’s door trim panel There is no anti-pinch protection when the window is allows you to disable the window control on the rear almost closed.
  • Page 35: Wind Buffeting

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Wind Buffeting NOTE: The liftgate cannot be unlocked or locked with the manual door lock plungers on the door trim panels or the Wind buffeting can be described as the perception of door lock cylinder on the driver’s door.
  • Page 36: Occupant Restraint Systems

    34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Important Safety Precautions WARNING! Please pay close attention to the information in this section. • Driving with the liftgate open can allow poisonous It tells you how to use your restraint system properly, to exhaust gases into your vehicle.
  • Page 37: Seat Belt Systems

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 5. You should read the instructions provided with your WARNING! child restraint to make sure that you are using it • Never place a rear-facing child restraint in front of an properly. air bag.
  • Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System (BeltAlert) BeltAlert Warning Sequence Driver And Passenger BeltAlert — If Equipped The BeltAlert warning sequence is activated when the vehicle is moving above a specified vehicle speed range BeltAlert is a feature intended to remind the driver and the driver or outboard front seat passenger is unbuck- and outboard front seat passenger (if equipped with...
  • Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 The outboard front passenger seat BeltAlert is not active and reduce your risk of striking the inside of the vehicle or when the outboard front passenger seat is unoccupied. being thrown out of the vehicle. BeltAlert may be triggered when an animal or other items are placed on the outboard front passenger seat or when WARNING!
  • Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A twisted seat belt may not protect you properly. In driver, should always wear their seat belts whether or not an air bag is also provided at their seating a collision, it could even cut into you.
  • Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 WARNING! (Continued) • A shoulder belt placed behind you will not protect you from injury during a collision. You are more likely to hit your head in a collision if you do not wear your shoulder belt.
  • Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low across 5. Position the shoulder belt across the shoulder and chest your hips, below your abdomen.
  • Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the seat belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
  • Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is Seat Belt Extender equipped with an Easy Up feature. This feature allows the If a seat belt is not long enough to fit properly, even when shoulder belt anchorage to be adjusted in the upward the webbing is fully extended and the adjustable upper position without pushing or squeezing the release button.
  • Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 Seat Belts And Pregnant Women Seat Belt Pretensioner The front seat belt system is equipped with pretensioning devices that are designed to remove slack from the seat belt in the event of a collision. These devices may improve the performance of the seat belt by removing slack from the seat belt early in a collision.
  • Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Switchable Automatic Locking Retractors (ALR) – If If the passenger seating position is equipped with an ALR Equipped and is being used for normal usage, only pull the seat belt webbing out far enough to comfortably wrap around the The seat belts in the passenger seating positions may be occupant’s mid-section so as to not activate the ALR.
  • Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 WARNING! WARNING! • Never place a rear-facing child restraint in front of an • The seat belt assembly must be replaced if the air bag. A deploying passenger front air bag can switchable Automatic Locking Retractor (ALR) fea- cause death or serious injury to a child 12 years or ture or any other seat belt function is not working...
  • Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How The Active Head Restraints (AHR) Work Active Head Restraint (AHR) Components: The Occupant Restraint Controller (ORC) determines whether the severity or type of rear impact will require the Active Head Restraints (AHR) to deploy. If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed.
  • Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 Resetting Active Head Restraints (AHR) WARNING! If the Active Head Restraints are triggered during a collision, • All occupants, including the driver, should not oper- the front half of the head restraint will be extended forward ate a vehicle or sit in a vehicle’s eat until the head and separated from the rear half of the head restraint (see restraints are placed in their proper positions in...
  • Page 50: Supplemental Restraint Systems (Srs)

    48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters WARNING! • Driver and Front Passenger Air Bags Deployed AHRs are not able to best protect you in all • Supplemental Side Air Bags types of collisions. Have deployed AHRs reset by an authorized dealer immediately.
  • Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 The ORC turns on the Air Bag Warning Light in the NOTE: If the speedometer, tachometer, or any engine instrument panel for approximately four to eight seconds related gauges are not working, the Occupant Restraint for a self-check when the ignition switch is first in the Controller (ORC) may also be disabled.
  • Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • Never place a rear-facing child restraint in front of an air bag. A deploying passenger front air bag can cause death or serious injury to a child 12 years or younger, including a child in a rear-facing child restraint.
  • Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 This vehicle may be equipped with driver and/or front Front Air Bag Operation passenger seat track position sensors that may adjust the Front Air Bags are designed to provide additional protec- inflation rate of the Advanced Front Air Bags based upon tion by supplementing the seat belts.
  • Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The steering wheel hub trim cover and the upper right side of Supplemental Side Air Bags the instrument panel separate and fold out of the way as the Your vehicle is equipped with two types of side air bags: air bags inflate to their full size.
  • Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the SAB inflates.
  • Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE area where the SABICs inflate. Children are at an even Side Air Bags are a supplement to the seat belt restraint greater risk of injury from a deploying air bag. system. Side Air Bags deploy in less time than it takes to blink your eyes.
  • Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Side Impacts WARNING! In side impacts, the side impact sensors aid the ORC in • Side Air Bags need room to inflate. Do not lean determining the appropriate response to impact events. against the door or window.
  • Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Rollover Events Air Bag System Components • Occupant Restraint Controller (ORC) Side Air Bags are designed to activate in certain rollover events. The ORC determines whether the deployment of • Air Bag Warning Light the Side Air Bags in a particular rollover event is appro- •...
  • Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 If you do have a collision which deploys the air bags, any Do not drive your vehicle after the air bags have deployed. or all of the following may occur: If you are involved in another collision, the air bags will not be in place to protect you.
  • Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System Maintaining Your Air Bag System In the event of an impact, if the communication network WARNING! remains intact, and the power remains intact, depending on the nature of the event, the ORC will determine whether •...
  • Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 • How fast the vehicle was traveling. WARNING! (Continued) • These data can help provide a better understanding of dealer. Only manufacturer approved seat accessories the circumstances in which crashes and injuries occur. may be used.
  • Page 62: Child Restraints

    60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints There are different sizes and types of restraints for children from newborn size to the child almost large enough for an Everyone in your vehicle needs to be buckled up at all adult safety belt.
  • Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Summary Of Recommendations For Restraining Children In Vehicles Recommended Type Of Child Re- Child Size, Height, Weight Or Age straint Infants and Toddlers Children who are two years old or Either an Infant Carrier or a Convert- younger and who have not reached ible Child Restraint, facing rearward the height or weight limits of their...
  • Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infant And Child Restraints WARNING! Safety experts recommend that children ride rear-facing in • Never place a rear-facing child restraint in front of an the vehicle until they are two years old or until they reach air bag.
  • Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Older Children And Child Restraints WARNING! Children who are two years old or who have outgrown Do not install a rear-facing car seat using a rear support their rear-facing convertible child seat can ride forward- leg in this vehicle.
  • Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Integrated Child Booster Seat — If Equipped WARNING! The Integrated Child Booster Seat is located in each out- • Improper installation can lead to failure of an infant board second-row passenger seat. or child restraint.
  • Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 2. Pull the release loop forward to release the latch and seat cushion. Booster Seat 4. Place the child upright in the seat with their back firmly against the seatback. Release Loop 3.
  • Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 7. Once the seat belt is long enough to fit properly, insert WARNING! the latch plate into the buckle until you hear a “click.” Securely lock the seat cushion into position before using the seat.
  • Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Children Too Large For Booster Seats If the answer to any of these questions was “no,” then the child still needs to use a booster seat in this vehicle. If the Children who are large enough to wear the shoulder belt child is using the lap/shoulder belt, check seat belt fit comfortably, and whose legs are long enough to bend over periodically and make sure the seat belt buckle is latched.
  • Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use Any Attachment Method Shown With An “X” Below Weight of the LATCH – Lower Seat Belt Only LATCH – Lower Seat Belt + Top Child + Child Anchors Only Anchors + Top...
  • Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Lower Anchors And Tethers For CHildren (LATCH) used with the top tether anchorage to install the child Restraint System restraint. Please see the following table for more information. LATCH Positions For Installing Child Restraints In This Vehicle LATCH Label Your vehicle is equipped with the child restraint anchorage...
  • Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until the weight of the child restraint) for using the combined weight of the child and the child LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
  • Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Frequently Asked Questions About Installing Child Restraints With LATCH Can the head restraints be removed? 5 Passenger Vehicle: All second row head restraints are removable. 7 Passenger Vehicle: All second and third row head restraints are removable.
  • Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Center Seat LATCH This vehicle has 5 lower LATCH anchorages in the rear seat. Anchorages A and B are used for the right outboard position behind the front passenger (1). Anchorages D and E are used for the left outboard position behind the driver (3).
  • Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 2. Left outboard and center seating positions (3 and 2): Install the first child seat in the left outboard seating position using lower anchorages D and E. Install the second child seat using the center anchorages, B and C. Do not use the outer anchorage closest to the opposite door, A.
  • Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Place the child seat between the lower anchorages for WARNING! (Continued) that seating position. For some second row seats, you • If you are installing three child restraints next to each may need to recline the seat and/or raise the head other, you must use the seat belt and the center tether restraint to get a better fit.
  • Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 How To Stow An Unused Switchable-ALR (ALR) WARNING! (Continued) Seat Belt • Child restraint anchorages are designed to withstand When using the LATCH attaching system to install a child only those loads imposed by correctly-fitted child restraint, stow all ALR seat belts that are not being used by restraints.
  • Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The seat belts in the passenger seating positions are Lap/Shoulder Belt Systems For Installing Child equipped with either a Switchable Automatic Locking Restraints In This Vehicle Retractor (ALR) or a cinching latch plate or both. Both types of seat belts are designed to keep the lap portion of the seat belt tight around the child restraint so that it is not necessary to use a locking clip.
  • Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + Weight limit of the Always use the tether anchor when using the weight of the child restraint) for using the Child Restraint seat belt to install a forward facing child re- Tether Anchor with the seat belt to attach a...
  • Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Place the child seat in the center of the seating position. 6. Try to pull the webbing out of the retractor. If it is For some second row seats, you may need to recline the locked, you should not be able to pull out any webbing.
  • Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Installing A Child Restraint With A Cinching Latch 2. Next, pull enough of the seat belt webbing from the Plate (CINCH) — If Equipped: retractor to pass it through the belt path of the child restraint.
  • Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Any seat belt system will loosen with time, so check the WARNING! (Continued) belt occasionally, and pull it tight if necessary. strap of a rear-facing car seat to the tether anchorage If the buckle or the cinching latch plate is too close to the that is approved for that seating position, located belt path opening of the child restraint, you may have behind the top of the vehicle seat.
  • Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 4. Remove slack in the tether strap according to the child restraint manufacturer’s instructions. Seat Track Release Lever 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your Rear Seat Tether Strap Mounting vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the...
  • Page 84: Transporting Pets

    82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE While cruising, brief full-throttle acceleration within the WARNING! (Continued) limits of local traffic laws contributes to a good break-in. • If your vehicle is equipped with a split rear seat, Wide-open throttle acceleration in low gear can be detri- make sure the tether strap does not slip into the mental and should be avoided.
  • Page 85: Safety Tips

    THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 SAFETY TIPS WARNING! (Continued) Transporting Passengers Failure to follow this warning may result in personal injury. NEVER TRANSPORT PASSENGERS IN THE CARGO • On seven passenger models, do not allow a passen- AREA.
  • Page 86: Safety Checks You Should Make Inside The Vehicle

    84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Safety Checks You Should Make Inside The Vehicle WARNING! (Continued) Seat Belts closed and the climate control BLOWER switch is set at high speed. DO NOT use the recirculation mode. Inspect the seat belt system periodically, checking for cuts, •...
  • Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Defroster WARNING! (Continued) Check operation by selecting the defrost mode and place Lightly pull to confirm mat is secured using the the blower control on high speed. You should be able to floor mat fasteners on a regular basis.
  • Page 88: Periodic Safety Checks You Should Make Outside The Vehicle

    86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Periodic Safety Checks You Should Make Outside WARNING! (Continued) The Vehicle • ONLY use the passenger’s side floor mat on the Tires passenger’s side floor area. • ALWAYS make sure objects cannot fall or slide into Examine tires for excessive tread wear and uneven wear the driver’s side floor area when the vehicle is patterns.
  • Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Advanced Phone Connectivity ... . .109 MIRRORS ......91 ▫...
  • Page 90 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Automatic Headlights ....175 SEATS ....... .155 ▫...
  • Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89 ▫ Mist Feature ......182 ▫ Service The ParkSense Rear Park Assist System. .192 ▫...
  • Page 92 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Troubleshooting Tips ....204 STORAGE ......214 ▫...
  • Page 93: Mirrors

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91 MIRRORS Inside Day/Night Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. Headlight glare from vehicles behind you can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
  • Page 94: Outside Mirrors

    92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: CAUTION! • The Automatic Dimming Mirror feature is disabled To avoid damage to the mirror during cleaning, never when the vehicle is in REVERSE to improve rear view spray any cleaning solution directly onto the mirror. viewing.
  • Page 95: Power Mirrors

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Power Mirrors Models With Express Window Feature The power mirror switch is located on the driver’s door Push and release the mirror select button marked L (left) or trim panel. R (right). Then, push one of the four arrow buttons to move the mirror in the direction the arrow is pointing.
  • Page 96: Manual Folding Mirrors - If Equipped

    94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Resetting The Power Folding Outside Mirrors You may need to reset the power folding mirrors if the following occurs: • The mirrors are accidentally blocked while folding. • The mirrors are accidentally manually folded/unfolded. •...
  • Page 97: Heated Mirrors - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Heated Mirrors — If Equipped These mirrors are heated to melt frost or ice. This feature will be activated whenever you turn on the rear window defroster (if equipped). Refer to “Rear Win- dow Features”...
  • Page 98: Uconnect Phone (4.3)

    96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Setting Favorite Contact Phone numbers so they are UCONNECT PHONE (4.3) easily accessible on the Main Phone screen Radio 4.3 • Viewing and Calling contacts from Recent Call logs Uconnect Phone is a voice-activated, hands-free, in-vehicle •...
  • Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 vehicle and enables you to mute the system’s microphone Uconnect Phone Button for private conversation. The Uconnect Phone Button is used to enter the phone mode and make calls, show recent, WARNING! incoming, outgoing calls, view phonebook etc., When you press the button you will hear Any voice commanded system should be used only in a BEEP.
  • Page 100: Operation

    98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation example, you can use the compound command form voice command “Search for John Smith,” or you can break the Voice commands can be used to operate the Uconnect compound command form into two voice commands: Phone and to navigate through the Uconnect Phone menu “Search Contact”...
  • Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 The system utilizes continuous dialog; when the system Pair (Link) Uconnect Phone To A Mobile Phone requires more information from the user it will ask a To begin using your Uconnect Phone, you must pair your question to which the user can respond without pushing compatible Bluetooth enabled mobile phone.
  • Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE select Yes you will go the Paired Phones screen, if you 5. Search for available devices on your Bluetooth enabled select No you will return to the Uconnect Phone main Audio Device. When prompted on the device, select the menu.
  • Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Connecting To A Particular Mobile Phone Or Audio Deleting A Phone Or Audio Device Device 1. Push the SETTINGS button on the faceplate. Uconnect Phone will automatically connect to the highest 2. Press the “Phone/Bluetooth” button on the touchscreen. priority paired phone and/or Audio Device within range.
  • Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Only the phonebook of the currently connected mobile Phonebook Download (Automatic Phonebook Transfer From Mobile Phone) — If Equipped phone is accessible. • This downloaded phonebook cannot be edited or de- If equipped and specifically supported by your phone, Uconnect Phone automatically downloads names (text leted on the Uconnect Phone.
  • Page 105: Phone Call Features

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 Phone Call Features Dial By Saying A Number The following features can be accessed through the 1. Push the Phone button to begin. Uconnect Phone if the feature(s) are available on your 2. After the “Listening” prompt and the following beep, mobile service plan.
  • Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Ignore Recent Calls • Hold/unhold You may browse up to 34 of the most recent of each of the following call types: • Mute/unmute • Incoming Calls • Transfer the call to/from the phone •...
  • Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 Answer Or Reject An Incoming Call — Call first call, refer to “Toggling Between Calls” in this Currently In Progress section. To combine two calls, refer to “Join Calls” in this section. If a call is currently in progress and you have another incoming call, you will hear the same network tones for Toggling Between Calls call waiting that you normally hear when using your...
  • Page 108: Uconnect Phone Features

    106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Redial If the phone is not reachable and the Uconnect Phone is operational, you may reach the emergency number as follows: 1. Press the “Redial” button on the touchscreen, or push • Push the Phone button to begin.
  • Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Roadside Assistance/Towing Assistance You can use your Uconnect Phone to access a voice mail system or an automated service, such as a paging service or If you need roadside/towing assistance: automated customer service line. Some services require •...
  • Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Voice Response Length • The first number encountered for that contact will be It is possible for you to choose between Brief and Detailed sent. All other numbers entered for that contact will be Voice Response Length.
  • Page 111: Advanced Phone Connectivity

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Dialing Using The Mobile Phone Keypad Advanced Phone Connectivity You can dial a phone number with your mobile phone Transfer Call To And From Mobile Phone keypad and still use the Uconnect Phone (while dialing via The Uconnect Phone allows ongoing calls to be transferred the mobile phone keypad, the user must exercise caution from your mobile phone to the Uconnect Phone without...
  • Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Always wait for the beep before speaking. • When navigating through an automated system such as voice mail, or when sending a page, at the end of • Speak normally without pausing, just as you would speaking the digit string, make sure to say “Send.”...
  • Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Far End Audio Performance Bluetooth Communication Link Audio quality is maximized under: Mobile phones have been found to lose connection to the Uconnect Phone. When this happens, the connection can • Low-to-medium blower setting generally be reestablished by switching the phone off/on.
  • Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree...
  • Page 115: General Information

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 NOTE: General Information • You can replace “John Smith” with any name in your mobile This device complies with Part 15 of the FCC rules and RSS or favorite phone book. You can also say “Send a message to 210 of Industry Canada.
  • Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Setting Favorite Contact Phone numbers so they are Uconnect Phone supports the following features: easily accessible on the Main Phone screen. Voice Activated Features: • Viewing and Calling contacts from Recent Call logs. •...
  • Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 vehicle and enables you to mute the system’s microphone Uconnect Phone Button for private conversation. The Uconnect Phone button is used to enter the phone mode and make calls, show recent WARNING! incoming and outgoing calls, view phonebook along with other features.
  • Page 118: Operation

    116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation say each part of the command when you are asked for it. For example, you can use the compound command form Voice commands can be used to operate the Uconnect voice command “Search for John Smith,” or you can Phone and to navigate through the Uconnect Phone menu break the compound command form into two voice structure.
  • Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 The system utilizes continuous dialog; when the system Pair (Link) Uconnect Phone To A Mobile Phone requires more information from the user it will ask a To begin using your Uconnect Phone, you must pair your question to which the user can respond without pushing compatible Bluetooth enabled mobile phone.
  • Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect screen. • See step 4 to complete the process. 4.
  • Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 5. When the pairing process has successfully completed, You can also use the following VR commands to bring up the system will prompt you to choose whether or not the Paired Phone screen from any screen on the radio: this is your favorite phone.
  • Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. When the pairing process has successfully completed, 3. Press to select the particular Phone or the particular the system will prompt you to choose whether or not Audio Device. this is your favorite device. Selecting “Yes” will make 4.
  • Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 3. Press the settings icon button located to the right of the Phonebook Download (Automatic Phonebook device name for a different Phone or Audio Device than Transfer From Mobile Phone) — If Equipped the currently connected device.
  • Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Only the phonebook of the currently connected mobile phone is accessible. • This downloaded phonebook cannot be edited or de- leted on the Uconnect Phone. These can only be edited on the mobile phone. The changes are transferred and updated to Uconnect Phone on the next phone connec- tion.
  • Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Add From Mobile To Remove A Favorite 1. To remove a Favorite, select phonebook from the Phone main screen. Remove From Favorites 4. The Options pop-up will display, press “Remove from 2. Next select Favorites on the left side of the screen and Favs.”...
  • Page 126: Phone Call Features

    124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To change the Emergency or Towing Assistance numbers 5. The Options pop-up will appear and you can choose follow these steps. between Editing the number or resetting the number to default. 1. Press the “Phonebook” button from the Phone main screen.
  • Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • Recent Call Log Call Controls • SMS Message Viewer The touchscreen allows you to control the following call features: Dial By Saying A Number • Answer 1. Push the Phone button to begin. •...
  • Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Incoming Calls To send a touch-tone using Voice Recognition (VR), push the Voice Command button on your steering wheel • Outgoing Calls while in a call and say “Send 1234#” or you can say •...
  • Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Answer Or Ignore An Incoming Call — Call Place/Retrieve A Call From Hold Currently In Progress During an active call, press the “Hold” button on the If a call is currently in progress and you have another Phone main screen.
  • Page 130: Uconnect Phone Features

    128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Redial If the phone is not reachable and the Uconnect Phone is operational, you may reach the emergency number as Press the “Redial” button on the touchscreen, or push the follows: Phone button and after the “Listening” prompt and the following beep, say “Redial.”...
  • Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Working With Automated Systems WARNING! This method is used in instances where one generally has Your phone must be turned on and connected to the to push numbers on the mobile phone keypad while Uconnect Phone to allow use of this vehicle feature in navigating through an automated telephone system.
  • Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can also send stored mobile phonebook entries as Barge In — Overriding Prompts tones for fast and easy access to voice mail and pager The Voice Command button can be used when you entries.
  • Page 133: Advanced Phone Connectivity

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Phone And Network Status Indicators Mute/Un-Mute (Mute ON/OFF) Uconnect Phone will provide notification to inform you of When you mute the Uconnect Phone, you will still be able your phone and network status when you are attempting to hear the conversation coming from the other party, but to make a phone call using Uconnect Phone.
  • Page 134: Things You Should Know About Your Uconnect

    132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Things You Should Know About Your Uconnect WARNING! Phone ALWAYS drive safely with your hands on the wheel. Voice Command You have full responsibility and assume all risks For the best performance: related to the use of the Uconnect features and appli- •...
  • Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 Far End Audio Performance Your phone must support SMS over Bluetooth to use this feature. If the Uconnect Phone determines your phone is Audio quality is maximized under: not compatible with SMS messaging over Bluetooth the •...
  • Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Read Messages: Send Messages Using Buttons On The Touchscreen: If you receive a new text message while your phone is You can send messages using Uconnect Phone. To send a connected to Uconnect Phone, an announcement will be new message: made to notify you that you have a new text message.
  • Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Send Messages Using Voice Commands: 1. Push the Phone button. 2. After the “Listening” prompt and the following beep, say “Send message to John Smith mobile.” 3. After the system prompts you for what message you want to send, say the message you wish to send or say “List.”...
  • Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. I can’t talk right now. 5. Call me. 6. I’ll call you later. 7. I’m on my way. 8. Thanks. 9. I’ll be late. 10. I will be <number> minutes late. 11. See you in <number> minutes. 12.
  • Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Bluetooth Communication Link Mobile phones have been found to lose connection to the Uconnect Phone. When this happens, the connection can generally be re-established by switching the mobile phone OFF/ON. Your mobile phone is recommended to remain in Bluetooth ON mode.
  • Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree...
  • Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: 7. Storing Dial tones in contact names is possible but only the first number encountered in a contact name will be 1. You can replace “John Smith” with any name in your sent.
  • Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 NOTE: 5. You can replace “248 555 1212” with any phone number supported by your Mobile phone. 1. You can replace “John Smith” with any name in your mobile or favorite phone book. You can also say “Send 6.
  • Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Available Voice Commands are shown in bold face and underlined in the gray shaded boxes.
  • Page 145: General Information

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 General Information VOICE COMMAND (RADIO 8.4/8.4 NAV) This device complies with FCC rules Part 15 and Industry Radio 8.4/8.4 NAV Canada RSS-210. Operation is subject to the following two conditions: The Uconnect Voice Command system allows 1.
  • Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If no command is spoken the system will say one of two The system will best recognize your speech if the windows responses: are closed, and the heater/air conditioning fan is set to low. •...
  • Page 147: Uconnect Voice Commands

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 The system utilizes continuous dialog; when the system Starting Voice Recognition (VR) Session In requires more information from the user it will ask a Radio/Player Modes question to which the user can respond without pressing In this mode, you can say the following commands: the Uconnect Voice Command button.
  • Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Tree...
  • Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 NOTE: • You can replace “950 AM” with any other AM or FM frequency, such as “98.7 FM.” • You can replace “80’s on 8” with any other satellite station name received by the radio. •...
  • Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 NOTE: • You can replace the album, artist, song, genre, playlist, podcast and audio book names with any corresponding names on the current device that is playing. • You can replace “8” with any track on the CD that is currently playing.
  • Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: • You can replace “NFL” with any league shown on the sports league screen. For example you can say “Show MLB headlines” or “Show PGA headlines.” • You can replace “Headlines” with any menu items shown on a league screen.
  • Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 NOTE: • Only available with Navigation equipped vehicles. • You can replace “Player” with “Radio,” “Navigation,” “Phone,” “Climate,” “More” or “Settings.” • Navigation commands only work if equipped with Navigation. • Available Voice Commands are shown in bold face and shaded grey.
  • Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
  • Page 157: Understanding The Features Of Your Vehicle

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 NOTE: SEATS • You can also say “Find City,” “Find Favorite,” “Find Seats are a part of the Occupant Restraint System of the Play by Category,” “Find Play by Name,” “Find Re- vehicle. cently Found,”...
  • Page 158: Driver's Power Seat - If Equipped

    156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Power Seat — If Equipped Adjusting The Seat Up Or Down The power seat switch is on the outboard side of the seat The height of the seats can be adjusted up or down. Pull near the floor.
  • Page 159: Power Lumbar - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! (Continued) • Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision, you could slide under the seat belt, which could result in serious injury or death. CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat...
  • Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the HI-level setting is selected, the system will automati- WARNING! cally switch to LO-level after approximately 60 minutes of • Persons who are unable to feel pain to the skin continuous operation. At that time, the display will change from HI to LO, indicating the change.
  • Page 161: Manual Front Seat Adjustments

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Manual Front Seat Adjustments WARNING! For models equipped with manual seats, the driver and • Adjusting a seat while driving may be dangerous. passenger seats can be adjusted forward or rearward by Moving a seat while driving could result in loss of using a bar located by the front of the seat cushion, near the control which could cause a collision and serious floor.
  • Page 162: Driver's Seat Height Adjustment - If Equipped

    160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver’s Seat Height Adjustment — If Equipped The seat height control lever is located on the outboard side of the seat. Raise the lever to raise the seat. Lower the lever to lower the seat. The total seat travel is approximately 2.15 inches (55 mm).
  • Page 163: Fold-Flat Front Passenger Seat - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Fold-Flat Front Passenger Seat — If Equipped NOTE: You may experience deformation in the seat cush- ion from the seat belt buckles if the seats are left folded for This feature allows for extended cargo space. When the an extended period of time.
  • Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This system is designed to help prevent or reduce the WARNING! extent of injuries to the driver and front passenger in • All occupants, including the driver, should not oper- certain types of rear impacts. Refer to “Occupant Re- straints”...
  • Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 For comfort, the Active Head Restraints can be tilted forward and backward. To tilt the head restraint closer to the back of your head, pull forward on the bottom of the head restraint. Push rearward on the bottom of the head restraint to move the head restraint away from your head.
  • Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE push the adjustment button located on the base of the head WARNING! restraint, and push downward on the head restraint. • All occupants, including the driver, should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
  • Page 167: Third Row Passenger Seats - Seven Passenger Models

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 To remove the head restraint, push the adjustment and the Third Row Passenger Seats — Seven Passenger release buttons while pulling upward on the whole assem- Models bly and raise it up as far as it can go. To reinstall the These head restraints are non-adjustable and non- headrest, put the headrest posts into the holes while removable.
  • Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. •...
  • Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 4. Gently guide the seatback into the folded position. NOTE: You may experience deformation in the seat cush- ion from the seat belt buckles if the seats are left folded for an extended period of time. This is normal and by simply opening the seats to the open position, over time the seat cushion will return to its normal shape.
  • Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Recliner Adjustment WARNING! The recline lever is on the outboard side of the seat. To • Adjusting a seat while the vehicle is moving is recline the seatback, lean back, lift the lever, position the dangerous.
  • Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Stadium Tip ’n Slide (Easy Entry/Exit Seat) — Seven Passenger Models This feature allows passengers to easily enter or exit the third-row passenger seats from either side of the vehicle. To Move The Second-Row Passenger Seat Forward NOTE: Raise the seatback/armrest before moving the seat to allow for full seat travel.
  • Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold And Move The Second-Row Passenger Seat Rearward Move the seatback rearward until it locks in place and then continue sliding the seat rearward on its tracks until it locks in place. Push the seat cushion downward to lock it in place.
  • Page 173: 50/50 Split Third-Row Passenger Seats With Fold-Flat Feature - Seven Passenger Models

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 50/50 Split Third-Row Passenger Seats With Fold-Flat Feature — Seven Passenger Models To provide additional storage area, each third-row passen- ger seatback can be folded flat. This allows for extended cargo space and still maintains some rear seating room if needed.
  • Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold The Seatback WARNING! Grasp the assist strap loop on the seatback and pull it • Be certain that the seatback is locked securely into toward you to raise the seatback. Continue to raise the position.
  • Page 175: To Open And Close The Hood

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 TO OPEN AND CLOSE THE HOOD 2. Outside of the vehicle, locate the safety latch lever near the center of the grille between the grille and hood Two latches must be released to open the hood. opening.
  • Page 176: Lights

    174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Use the hood prop rod to secure the hood in the open CAUTION! position. Place the upper end of the prop rod in the hole on the underside of the hood. To prevent possible damage: •...
  • Page 177: Automatic Headlights

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 for up to 90 seconds after you place the ignition into the OFF position. The headlight time delay can be pro- grammed 0/30/60/90 seconds. Refer to “Uconnect Settings” in “Understanding Your Instrument Panel” for further information. To turn the automatic system off, move the headlight switch out of the AUTO position.
  • Page 178: Headlight Time Delay

    176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlight Time Delay Daytime Running Lights (DRL) This feature provides the safety of headlight illumination The Daytime Running Lights will turn on the first time the for up to 90 seconds when leaving your vehicle in an unlit vehicle is shifted out of PARK, and remain on unless the area.
  • Page 179: Fog Lights - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Fog Lights — If Equipped NOTE: The fog lights will operate when the low beam headlights or parking lights are on. However, selecting the The front fog light switch is built into the headlight switch. high beam headlights will turn off the fog lights.
  • Page 180: Turn Signals

    178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signals High/Low Beam Switch Move the multifunction lever up or down and the arrows Push the multifunction lever away from you to switch the on each side of the instrument cluster flash to show proper headlights to high beam.
  • Page 181: Map/Reading Lights

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Dimmer Controls Dome Light Position The dimmer control is part of the headlight switch and is Rotate the dimmer control completely upward to the located on the left side of the instrument panel. Rotating second detent to turn on the interior lights.
  • Page 182: Windshield Wipers And Washers

    180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS between cycles, desirable. Rotate the end of the windshield wiper/washer control lever to one of the first five detents The windshield wiper/washer control lever is located on to select the desired delay interval. the left side of the steering column.
  • Page 183: Windshield Wiper Operation

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 NOTE: The wiper delay times depend on vehicle speed. If NOTE: The wipers will automatically return to the “park” the vehicle is moving less than 10 mph (16 km/h), delay position if you turn OFF the ignition switch while they are times will be doubled.
  • Page 184: Windshield Washers

    182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Washers Mist Feature To use the windshield washer, push the washer knob, Push the washer knob, located on the end of the multifunc- located on the end of the multifunction lever, inward to the tion lever, inward to the first detent to activate a single second detent.
  • Page 185: Tilt/Telescoping Steering Column

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 TILT/TELESCOPING STEERING COLUMN column in position, pull the control handle upward until fully engaged. This feature allows you to tilt the steering column upward or downward. It also allows you to lengthen or shorten the WARNING! steering column.
  • Page 186: Speed Control - If Equipped

    184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The heated steering wheel control button is located within WARNING! the Uconnect system. You can gain access to the control • Persons who are unable to feel pain to the skin button through the climate screen or the controls screen. because of advanced age, chronic illness, diabetes, •...
  • Page 187: To Activate

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 To Activate Push the ON/OFF button. The cruise control indicator light in the instrument cluster display will illuminate. To turn the system off, push the ON/OFF button a second time. The cruise control indicator light will turn off. The system should be turned off when not in use.
  • Page 188: To Deactivate

    186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate U.S. Speed (mph) • Pushing the RES (+) button once will result in a 1 mph A soft tap on the brake pedal, pushing the CANCEL increase in set speed. Each subsequent tap of the button button, or normal brake pressure while slowing the vehicle results in an increase of 1 mph.
  • Page 189: To Accelerate For Passing

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 The driver’s preferred units can be selected through the Using Speed Control On Hills Uconnect settings if equipped. Refer to Uconnect Settings” The transmission may downshift on hills to maintain the in Understanding Your Instrument Panel” for more infor- vehicle set speed.
  • Page 190: Parksense Rear Park Assist - If Equipped

    188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKSENSE REAR PARK ASSIST — IF EQUIPPED ParkSense Sensors The ParkSense Rear Park Assist system provides visual and The four ParkSense sensors, located in the rear fascia/ audible indications of the distance between the rear fascia bumper, monitor the area behind the vehicle that is within and a detected obstacle when backing up, e.g.
  • Page 191: Parksense Display

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 ParkSense Display When the vehicle is in REVERSE, the warning display will turn on indicating the system status. Park Assist System Off The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the obstacle, the instrument Park Assist Ready cluster display will show fewer arcs and the sound tone...
  • Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Slow Tone Fast Tone...
  • Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: Continuous Tone WARNING ALERTS Rear Distance...
  • Page 194: Enabling And Disabling Parksense

    192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling And Disabling ParkSense Display” in “Understanding Your Instrument Panel” for further information. When the gear selector is moved to ParkSense can be enabled and disabled using the Uconnect REVERSE and the system has detected a fault condition, System.
  • Page 195: Parksense System Usage Precautions

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 • Ensure the ParkSense system is OFF if objects such as ParkSense System Usage Precautions bicycle carriers, trailer hitches, etc., are placed within NOTE: 12 inches (30 cm) from the rear fascia/bumper. Failure to •...
  • Page 196: Parkview Rear Back Up Camera - If Equipped

    194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW REAR BACK UP CAMERA — IF WARNING! (Continued) EQUIPPED rear fascia when the loudspeaker sounds the con- Your vehicle may be equipped with the ParkView Rear tinuous tone. Also, the sensors could detect the ball Back Up Camera that allows you to see an on-screen image mount and hitch ball assembly, depending on its size of the rear surroundings of your vehicle whenever the gear...
  • Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 receiver. The static grid lines will show separate zones that Different colored zones indicate the distance to the rear of will help indicate the distance to the rear of the vehicle. the vehicle. NOTE: The ParkView Rear Back Up Camera has program- The following table shows the approximate distances for mable modes of operation that may be selected through the...
  • Page 198: Overhead Console

    196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE Courtesy/Reading Lights The overhead console contains courtesy/reading lights, The overhead console has two courtesy lights. The lights storage for sunglasses, an interior observation mirror and turn on when a front door, a rear door or the liftgate is an optional power sunroof switch.
  • Page 199: Sunglasses Storage

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Sunglasses Storage the door until it is almost closed and release. The door will latch in position to use the interior observation mirror. To access the storage compartment, push on the raised bars on the compartment door in the center of the console and NOTE: From the “observation mirror”...
  • Page 200: Garage Door Opener - If Equipped

    198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three remote controls (hand-held transmitters) that operate devices such as garage door openers, motorized gates, lighting or home security sys- tems. The HomeLink unit operates off your vehicle’s battery.
  • Page 201: Programming A Rolling Code

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 To erase the channels, place the ignition in the ON/RUN position and push and hold the two outside HomeLink buttons (I and III) for up 20 seconds or until the red indicator flashes. NOTE: •...
  • Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) 6. Return to the vehicle and push the programmed away from the HomeLink button you wish to program HomeLink button twice (holding the button for two while keeping the HomeLink indicator light in view.
  • Page 203: Programming A Non-Rolling Code

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 2. Push and hold the desired HomeLink button until the 3. Push and hold the HomeLink button you want to indicator light begins to flash after 20 seconds. Do not program while you push and hold the hand-held trans- mitter button.
  • Page 204: Canadian/Gate Operator Programming

    202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink Button which may not be long enough for HomeLink to pick up (Non-Rolling Code) the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to time-out in To reprogram a channel that has been previously trained, the same manner.
  • Page 205: Using Homelink

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 4. Watch for the HomeLink indicator to change flash rates. NOTE: For vehicles equipped with Keyless Enter-N-Go, When it changes, it is programmed. It may take up to 30 place the ignition in the RUN position with the engine ON. seconds or longer in rare cases.
  • Page 206: Security

    204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Security If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at It is advised to erase all channels before you sell or turn in HomeLink.com for information or assistance. your vehicle.
  • Page 207: General Information

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 General Information POWER SUNROOF — IF EQUIPPED This device complies with FCC rules Part 15 and Industry The power sunroof switch is located between the sun Canada RSS-210. Operation is subject to the following two visors on the overhead console.
  • Page 208: Opening Sunroof - Express

    206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Manual Mode WARNING! (Continued) To open the sunroof, push and hold the switch rearward. equipped with Keyless Enter-N-Go in the ACC or The sunroof will move rearward and automatically stop at ON/RUN mode.
  • Page 209: Pinch Protect Feature

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Pinch Protect Feature down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occurrence and This feature will detect an obstruction in the opening of the can be minimized.
  • Page 210: Power Outlets

    208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER OUTLETS A second 12 Volt (13 Amp) power outlet is located inside the center console storage area. Power is available with the A 12 Volt (13 Amp) power outlet is located in the center ignition is in the ON/RUN, ACC or LOCK position.
  • Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 A third fused 12 Volt power outlet is located on the back of the center console. This power outlet has power available when the ignition is in the LOCK, ON or ACC position. Rear Cargo Area Power Outlet NOTE: To ensure proper operation a MOPAR knob and element must be used.
  • Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced. •...
  • Page 213: Power Inverter - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 WARNING! (Continued) CAUTION! (Continued) • Close the lid when not in use and while driving the • After the use of high power draw accessories, or long vehicle. periods of the vehicle not being started (with acces- •...
  • Page 214: Power Inverter Operation

    212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Due to built-in overload protection, the power outlet will shut down if the 115 Volt AC (150 Watt maxi- mum) power rating is exceeded. WARNING! To avoid serious injury or death: • Do not use a three-prong adaptor. •...
  • Page 215: Cupholders

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 Vehicles Equipped With Radio 8.4/8.4 NAV For passengers in the second row there are two cupholders, located in the center armrest between the two seats. To turn the power inverter on or off perform the following: When the armrest is folded flat the cupholders are in the 1.
  • Page 216: Storage

    214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In addition to cupholders, vehicles may also be equipped STORAGE with bottle holders. The bottle holders are located on the Glove Compartment door trim panels. The glove compartment is located on the passenger side of the instrument panel.
  • Page 217: Floor Console Storage

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Floor Console Storage Center Console Storage An open storage area, or cubby bin, is located in the floor There is a storage tray and storage compartment located console. under the center console armrest. Floor Console Cubby Bin Center Console...
  • Page 218 216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull upward on the release handle, located on the front of the lid, to gain access to the storage tray and storage compartment. Center Console Storage Compartment WARNING! Center Console Storage Tray Do not operate this vehicle with a console compartment lid in the open position.
  • Page 219: Flip 'N Stow Front Passenger Seat Storage - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 Sliding Armrest Flip ’n Stow Front Passenger Seat Storage — If Equipped The center console armrest can also slide rearward for easy access to the storage area. The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback.
  • Page 220: Second-Row Map Pocket And Grocery Retainers - If Equipped

    218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE In-Floor Storage Bin With Removable Liner WARNING! NOTE: Position the front seat to at least a mid-track Be certain that the seat cushion is locked securely into position to provide easier access to the storage bin. position before using the seat.
  • Page 221: Cargo Area Features

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 • 60/40 split second-row passenger seats with fold flat The liner can be removed for easy cleaning. feature, which allows for extended cargo space. Refer to “Seats” in “Understanding The Features Of Your Ve- hicle”...
  • Page 222 220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • 50/50 split third-row passenger seats with fold flat feature, which allows for extended cargo space. Refer to “Seats” in “Understanding The Features Of Your Ve- hicle” for further information. • An optional front passenger seat with fold flat feature, which extends cargo space even further.
  • Page 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 • Always place cargo evenly on the cargo floor. Put The cover rolls away neatly inside its housing when not in heavier objects as low and as far forward as possible. use. You can also remove the cover from the vehicle to make more room in the cargo area.
  • Page 224: Rear Window Features

    222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Insert the spring-loaded post on the opposite end of the WARNING! cover housing into the attachment point on the opposite side of the vehicle. A cargo cover that is unsecured in the vehicle could cause injury in a collision.
  • Page 225 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Rear Wiper/Washer Rear Wiper/Washer Control Rotate the switch upward to the first detent position If the rear wiper is operating when the ignition is turned to for rear wiper operation. the LOCK position, the wiper will automatically return to the “park”...
  • Page 226: Rear Window Defroster

    224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE when the rear window defroster is on. The rear window CAUTION! defroster automatically turns off after approximately 10 • Turn the rear wiper off when driving through an minutes. automatic car wash. Damage to the rear wiper may NOTE: To prevent excessive battery drain, use the rear result if the rear wiper switch is left in the onposi- window defroster only when the engine is operating.
  • Page 227: Roof Luggage Rack - If Equipped

    UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 ROOF LUGGAGE RACK — IF EQUIPPED The roof rack cross rails and side rails are designed to carry cargo weight. The load must not exceed 150 lbs (68 kg), and it should be distributed uniformly over the cross rails. In addition, the roof rack does not increase the total load carrying capacity of the vehicle.
  • Page 228 226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Attempt to move the crossbar to ensure that it is locked CAUTION! in position. • To prevent damage to the roof of your vehicle, DO NOTE: NOT carry any loads on the roof rack without the •...
  • Page 229 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 CAUTION! (Continued) • Travel at reduced speeds and turn corners carefully when carrying large or heavy loads on the roof rack. Wind forces, due to natural causes or nearby truck traffic, can add sudden upward loads. This is espe- cially true on large flat loads and may result in damage to the cargo or your vehicle.
  • Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Trip Info ......255 INSTRUMENT PANEL FEATURES ...232 ▫...
  • Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Accessibility ......297 UCONNECT MULTIMEDIA — VIDEO ENTERTAINMENT SYSTEM (VES) — ▫...
  • Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 ▫ Automatic Three Zone Temperature Control (ATC) ▫ Rear Automatic Temperature Control (ATC) — If With Touchscreen — If Equipped... .318 Equipped ......325...
  • Page 234: Instrument Panel Features

    232 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Side Window Demist Outlet 6 — Switch Bank 11 — CD/DVD Slot 2 — Air Outlet 7 — Uconnect Hard Controls 12 — Engine Start/Stop Button 3 — Instrument Cluster 8 —...
  • Page 235: Instrument Cluster

    UNDERSTANDING YOUR INSTRUMENT PANEL 233 INSTRUMENT CLUSTER Premium Instrument Cluster 1. Tachometer 2. Instrument Cluster Display • Indicates the engine speed in revolutions per minute • When the appropriate conditions exist, this display (RPM x 1000). shows the instrument cluster display messages. Refer to “Instrument Cluster Display”...
  • Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Speedometer WARNING! • Indicates vehicle speed. A hot engine cooling system is dangerous. You or 4. Fuel Gauge others could be badly burned by steam or boiling • The pointer shows the level of fuel in the fuel tank coolant.
  • Page 237: Warning And Indicator Lights

    UNDERSTANDING YOUR INSTRUMENT PANEL 235 WARNING AND INDICATOR LIGHTS All active telltales will display first if applicable. The system check menu may appear different based upon The warning/indicator lights switch on in the instrument equipment options and current vehicle status. Some tell- panel together with a dedicated message and/or acoustic tales are optional and may not appear.
  • Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition is placed in the ON/RUN position.
  • Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake appli- cation. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
  • Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Operation of the Brake Warning Light can be checked by WARNING! placing the ignition in the ON/RUN position. The light should illuminate for approximately two seconds. The light Driving a vehicle with the red brake light on is should then turn off unless the parking brake is applied or dangerous.
  • Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 Engine Temperature Warning Light Red Warning What It Means Light Engine Temperature Warning Light This light warns of an overheated engine condition. As engine coolant temperatures rise and the gauge approaches H, this indicator will illuminate and a single chime will sound after reaching a set threshold.
  • Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING! CAUTION! If you continue operating the vehicle when the Trans- Continuous driving with the Transmission Tempera- mission Temperature Warning Light is illuminated you ture Warning Light illuminated will eventually cause could cause the fluid to boil over, come in contact with severe transmission damage or transmission failure.
  • Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a prob- lem is detected while the engine is running, the light will either stay on or flash depending on the nature of the problem.
  • Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL Door Open Warning Light — If Equipped Red Telltale What It Means Light Door Open Warning Light This indicator will illuminate when a door is ajar/open and not fully closed. NOTE: If the vehicle is moving, there will also be a single chime. Liftgate Open Warning Light —...
  • Page 245: Yellow Telltale Indicator Lights

    UNDERSTANDING YOUR INSTRUMENT PANEL 243 Yellow Telltale Indicator Lights Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON/RUN position before engine start.
  • Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the vehicle control system. It also could affect fuel economy and driveability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required.
  • Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 Yellow Telltale What It Means Light • The ESC system will make buzzing or clicking sounds when it is active. This is normal; the sounds will stop when ESC becomes inactive. • This light will come on when the vehicle is in an ESC event. Electronic Stability Control (ESC) OFF Indicator Light —...
  • Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL can lead to tire failure. Under-inflation also reduces fuel CAUTION! efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Do not continue driving with one or more flat tires as handling may be compromised.
  • Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 ensure that the replacement or alternate tires and wheels CAUTION! (Continued) allow the TPMS to continue to function properly. damage may result when using replacement equip- ment that is not of the same size, type, and/or style. CAUTION! Aftermarket wheels can cause sensor damage.
  • Page 250: Green Telltale Indicator Lights

    248 UNDERSTANDING YOUR INSTRUMENT PANEL Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 2 gal (7.5 L) this light will turn on, and remain on un- til fuel is added. Low Washer Fluid Indicator Light —...
  • Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Front Fog Indicator Light — If Equipped Green Telltale What It Means Light Front Fog Indicator Light — If Equipped This indicator will illuminate when the front fog lights are on. Turn Signal Indicator Lights Green Telltale What It Means Light...
  • Page 252: White Telltale Indicator Lights

    250 UNDERSTANDING YOUR INSTRUMENT PANEL Speed Control SET Indicator Light Green Telltale What It Means Light Speed Control SET Indicator Light This light will turn on when the electronic speed control is set to the desired speed. Refer to “Speed Control” in “Understanding The Features Of Your Vehicle” for further information. White Telltale Indicator Lights Cruise Control Ready Indicator Light White Telltale...
  • Page 253: Blue Telltale Indicator Lights

    UNDERSTANDING YOUR INSTRUMENT PANEL 251 Blue Telltale Indicator Lights High Beam Indicator Light Blue Telltale What It Means Light High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switch the headlights back to low beam.
  • Page 254: Instrument Cluster Display Location And Controls

    252 UNDERSTANDING YOUR INSTRUMENT PANEL • Tire Pressure Instrument Cluster Display Location And Controls • Vehicle Information The instrument cluster display features a driver-interactive display that is located in the instrument cluster. • Messages • Turn Menu OFF The system allows the driver to select information by pushing the following buttons mounted on the steering wheel: Instrument Cluster Display...
  • Page 255: Oil Change Due

    UNDERSTANDING YOUR INSTRUMENT PANEL 253 • Up Arrow Button single chime has sounded to indicate the next scheduled oil • Push and release the up arrow button to scroll change interval. The engine oil change indicator system is upward through the main menus and duty cycle based, which means the engine oil change submenus.
  • Page 256: Fuel Economy

    254 UNDERSTANDING YOUR INSTRUMENT PANEL Fuel Economy Push and release the up or down arrow button until “Fuel Economy” displays highlighted in the ddff and push the right arrow button. The following Fuel Economy functions will display in the instrument cluster display: •...
  • Page 257: Vehicle Speed

    UNDERSTANDING YOUR INSTRUMENT PANEL 255 When the DTE value is less than 30 miles (48 km) estimated Trip Info driving distance, the DTE display will change to a “LOW Push and release the up or down arrow button until “Trip FUEL”...
  • Page 258: Tire Pressure

    256 UNDERSTANDING YOUR INSTRUMENT PANEL • Shows the elapsed time traveled for Trip A since the last Vehicle Info (Customer Information Features) reset. Push and release the up or down arrow button until “Vehicle Info” displays in the instrument cluster display Trip B and push the right arrow button.
  • Page 259: Messages

    UNDERSTANDING YOUR INSTRUMENT PANEL 257 Messages time and distance of the vehicle. This is done by reducing power to or turning off non-essential electrical loads. Push and release the up or down arrow button until “Messages: XX” displays highlighted in the instrument Load reduction is only active when the engine is running.
  • Page 260 258 UNDERSTANDING YOUR INSTRUMENT PANEL • Installing options like additional lights, upfitter electri- The electrical loads that may be switched off (if equipped), and vehicle functions which can be effected by load cal accessories, audio systems, alarms and similar de- reduction: vices.
  • Page 261: Cybersecurity

    UNDERSTANDING YOUR INSTRUMENT PANEL 259 What to do when an electrical load reduction action CYBERSECURITY message is present (“Battery Saver On” or “Battery Saver Your vehicle may be a connected vehicle and may be Mode”) equipped with both wired and wireless networks. These During a trip: networks allow your vehicle to send and receive informa- tion.
  • Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: WARNING! • FCA or your dealer may contact you directly regarding • It is not possible to know or to predict all of the software updates. possible outcomes if your vehicle’s systems are • To help further improve vehicle security and minimize breached.
  • Page 263: Uconnect Settings

    UNDERSTANDING YOUR INSTRUMENT PANEL 261 UCONNECT SETTINGS Buttons On The Touchscreen The Uconnect system uses a combination of buttons on the Buttons on the touchscreen are accessible on the Radio touchscreen and buttons on the faceplate located on the Touchscreen. center of the instrument panel that allows you to access and change the customer programmable features.
  • Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Only one touchscreen area may be selected at a Press the desired setting button on the touchscreen to time. change the setting using the description shown on the following pages for each setting. 1 — Radio 4.3 Buttons On The Faceplate Radio 4.3 Buttons On The Touchscreen Push the SETTINGS button on the faceplate to access the Settings screen, use the “Page Up”/“Page Down”...
  • Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 Display After pressing the “Display” button on the touchscreen, the following settings will be available: Setting Name Selectable Options Brightness – NOTE: The “Brightness” setting can also be adjusted by selecting any point on the scale between the “+” and “–” buttons on the touchscreen.
  • Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL Clock After pressing the “Clock & Date” button on the touch- screen the following settings will be available: Setting Name Selectable Options Set Time and Format 12 hour 24 hour NOTE: Within the “Set Time and Format” setting, press the corresponding arrow buttons on the touchscreen to adjust to the correct time.
  • Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 Setting Name Selectable Options Hill Start Assist — If Equipped Lights After pressing the “Lights” button on the touchscreen the following settings will be available: Setting Name Selectable Options Headlight Off Delay — 0 sec 30 sec 60 sec 90 sec...
  • Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Auto High Beams — If Equipped NOTE: When the “Automatic High Beam Headlamps” is selected, the high beam headlights will activate/deactivate auto- matically under certain conditions. Daytime Running Lights Steering Directed Lights —...
  • Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 Setting Name Selectable Options Auto Unlock On Exit NOTE: When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the trans- mission is in the PARK or NEUTRAL position and the driver’s door is opened. Flash Lights With Lock Sound Horn With Lock Sound Horn With Remote Start...
  • Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL Auto-On Comfort & Remote Start After pressing the “Auto-On Comfort & Remote Start” button on the touchscreen the following settings will be available: Setting Name Selectable Options Auto-On Heated Seats — Remote Start All Starts If Equipped NOTE: When this feature is selected the driver’s heated seat will automatically turn on when temperatures are below 40°...
  • Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 Setting Name Selectable Options Headlight Off Delay 0 sec 30 sec 60 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off.
  • Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Compass Calibration NOTE: Press “Compass Calibration” on the touchscreen to enter calibration. To start calibration of the compass, press the “Yes” but- ton on the touchscreen and complete one or more 360-degree turns (in an area free from large metal or metallic objects). A message will appear on the touchscreen when the compass has been successfully calibrated.
  • Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 Audio After pressing the “Audio” button on the touchscreen the following settings will be available: Setting Name Adjustable Options Equalizer Bass Treble NOTE: When in this display you may adjust the “Bass”, “Mid” and “Treble” settings. Adjust the settings with the “+” and “–”...
  • Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL Phone/Bluetooth After pressing the “Phone/Bluetooth” button on the touch- screen the following settings will be available: Setting Name Selectable Options Paired Phones List of Paired Phones NOTE: This feature shows which phones are paired to the Phone/Bluetooth system. For further information, refer to the Uconnect Owner’s Manual Supplement.
  • Page 275: Customer Programmable Features

    UNDERSTANDING YOUR INSTRUMENT PANEL 273 Setting Name Selectable Options Subscription Info Sirius ID NOTE: New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription Information screen to re-subscribe.
  • Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL Display After pressing the Display button on the touchscreen the following settings will be available: Setting Name Selectable Options Display Mode Manual Auto Display Brightness With Headlights ON NOTE: To make changes to the Display Brightness with Headlights ON setting, the headlights must be on and the interior dimmer switch must not be in the party or parade positions.
  • Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 Setting Name Selectable Options Units Metric Voice Response Length Brief Detailed Touchscreen Beep Navigation Turn-By-Turn In Cluster — If Equipped NOTE: When the “Navigation Turn-By-Turn In Cluster” feature is selected, the turn-by-turn directions will appear in the in- strument cluster display as the vehicle approaches a designated turn within a programmed route.
  • Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL Clock After pressing the Clock button on the touchscreen the following settings will be available. Setting Name Selectable Options Sync Time With GPS — If Equipped Set Time Hours NOTE: This feature will allow you to adjust the hours. The “Sync time with GPS” button on the touchscreen must be un- checked.
  • Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 Safety & Driving Assistance After pressing the Safety/Assistance button on the touch- screen the following settings will be available: Setting Name Selectable Options Park Assist — If Equipped Sound Only Sounds and Display NOTE: The Rear Park Assist system will scan for, and the alert the driver of, objects behind the vehicle when the transmis- sion gear selector is in REVERSE and the vehicle speed is less than 11 mph (18 km/h).
  • Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL Lights After pressing the Lights button on the touchscreen the following settings will be available: Setting Name Selectable Options Headlight Off Delay 0 sec 30 sec 60 sec 90 sec NOTE: When the “Headlight Off Delay” feature is selected, it allows the adjustment of the amount of time the headlights remain on after the engine is shut off.
  • Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 Setting Name Selectable Options Auto Dim High Beams— If Equipped NOTE: When the “Auto Dim High Beams” feature is selected, the high beam headlights will activate/deactivate automati- cally under certain conditions. Daytime Running Lights — If Equipped Steering Directed Headlights —...
  • Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL Doors & Locks After pressing the Doors & Locks button on the touch- screen the following settings will be available: Setting Name Selectable Options Auto Door Locks NOTE: When the “Auto Door Locks” feature is selected, all doors will lock automatically when the vehicle reaches a speed of 12 mph (20 km/h).
  • Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 Setting Name Selectable Options 1st Press Of Key Fob Unlocks Driver Door All Doors NOTE: When Driver Door is selected with 1st Press Of Key Fob Unlocks, only the driver’s door will unlock with the first press of the key fob unlock button.
  • Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL Auto-On Comfort & Remote Start After pressing the Auto-On Comfort & Remote Start button on the touchscreen the following settings will be available: Setting Name Selectable Options Auto-On Driver Heated Remote Start All Starts Seat With Vehicle Start— If Equipped NOTE: When this feature is selected the driver’s heated seat will automatically turn ON when temperatures are below 40°...
  • Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 Engine Off Options After pressing the “Engine Off Options” button on the touchscreen the following settings will be available: Setting Name Selectable Options Engine Off Power 0 seconds 45 seconds 5 minutes 10 minutes Delay NOTE: When the “Engine Off Power Delay”...
  • Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Settings — If Equipped NOTE: Before compass calibration is performed, the com- pass variance zone should be set for best results. After pressing the “Compass Settings” button on the touchscreen the following settings will be available: Setting Name Selectable Options Compass Vari-...
  • Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 Setting Name Selectable Options Perform Com- pass Calibra- tion NOTE: Press “Compass Calibration” on the touchscreen to enter calibration. To start calibration of the compass, press the “On” but- ton on the touchscreen and complete one or more 360-degree turns (in an area free from large metal or metallic objects). A message will appear on the touchscreen when the compass has been successfully calibrated.
  • Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL Audio After pressing the Audio button on the touchscreen the following settings will be available. Setting Name Adjustable Options Equalizer Bass Treble NOTE: When in this display you may adjust the “Bass”, “Mid” and “Treble” settings. Adjust the settings with the “+” and “–”...
  • Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 Phone/Bluetooth After pressing the “Phone/Bluetooth” button on the touch- screen the following settings will be available: Setting Name Selectable Options Paired Devices List of Paired Devices NOTE: This feature shows which devices are paired to the Phone/Bluetooth system. For further information, refer to the Uconnect Owner’s Manual Supplement.
  • Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Name Selectable Options Subscription Info Sirius ID NOTE: New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio. Following the expiration of the free services, it will be necessary to access the information on the Subscription Information screen to re-subscribe.
  • Page 291: Uconnect Multimedia - Video Entertainment System (Ves) - If Equipped

    UNDERSTANDING YOUR INSTRUMENT PANEL 289 UCONNECT MULTIMEDIA — VIDEO ENTERTAINMENT SYSTEM (VES) — IF EQUIPPED Your rear seat Video Entertainment System (VES) is de- signed to give your family years of enjoyment. You can play your favorite CDs or DVDs, listen to audio over the wireless headphones, or plug and play a variety of stan- dard video games or audio devices.
  • Page 292: Single Video Screen

    290 UNDERSTANDING YOUR INSTRUMENT PANEL Single Video Screen NOTE: The VES system will retain the last setting when turned off. NOTE: Typically there are two different ways to operate the features of the Video Entertainment System (VES). Play Video Games •...
  • Page 293: Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1

    UNDERSTANDING YOUR INSTRUMENT PANEL 291 Ensure the remote control channel selector switch and Using The Remote Control Headphone switch (IR channel) are the same number. 1. Push the MODE button on the Remote Control and the Using The Remote Control Mode Select Screen will display, unless a video is playing then only a small banner will appear on the 1.
  • Page 294: Important Notes For Single Video Screen System

    292 UNDERSTANDING YOUR INSTRUMENT PANEL Important Notes For Single Video Screen System Using The Remote Control • VES is able to transmit two channels of stereo audio 1. Push the MODE button on the Remote Control. simultaneously. 2. While looking at the Video Screen, highlight DISC by either •...
  • Page 295: Ves Remote Control - If Equipped

    UNDERSTANDING YOUR INSTRUMENT PANEL 293 VES Remote Control — If Equipped 3. Light – Turns the remote control backlighting on or off. The remote backlighting turns off automatically after five seconds. 4. Channel/Screen Selector Switch – Indicates which chan- nel is being controlled by the remote control. When the selector switch is in the Channel 1 position, the remote controls the functionality of headphone Channel 1 (right side of the screen).
  • Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL 9. ▪ (Stop) – Stops disc play. 16. BACK – When navigating in menu mode, push to return to the previous screen. When navigating a DVDs 10. PROG Up/Down – When listening to a radio mode, disc menu, the operation depends on the disc’s con- pushing PROG Up selects the next preset and pushing tents.
  • Page 297: Remote Control Storage

    UNDERSTANDING YOUR INSTRUMENT PANEL 295 Remote Control Storage Locking The Remote Control The video screen comes with a built in storage compart- All remote control functionality can be disabled as a ment for the remote control which is accessible when the parental control feature.
  • Page 298: Ves Headphones Operation

    296 UNDERSTANDING YOUR INSTRUMENT PANEL VES Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. If no audio is heard after increasing the volume control, verify that the screen is turned on and in the down position and that the channel is not muted and the headphone channel selector switch is on the desired channel.
  • Page 299: Controls

    UNDERSTANDING YOUR INSTRUMENT PANEL 297 • When both switches are on Channel 2, the Remote is 2. Replace the batteries, making sure to orient them ac- cording to the polarity diagram shown. controlling Channel 2 and the headphones are tuned to the audio of the VES Channel 2.
  • Page 300: Unwired Stereo Headphone Lifetime Limited

    298 UNDERSTANDING YOUR INSTRUMENT PANEL Unwired Stereo Headphone Lifetime Limited OR NATURE WHATSOEVER. Some states and jurisdictions may not allow the exclusion or limitation of incidental or Warranty consequential damages, so the above limitation may not apply Who Does This Warranty Cover? This warranty covers the to you.
  • Page 301: System Information

    UNDERSTANDING YOUR INSTRUMENT PANEL 299 System Information 2. Channel 1 Audio Only/Mute — Audio: The audio only icon is not used on Channel 1, in a single screen system. Information Mode Display Mute: when the Mute icon is displayed, the audio for Channel 1 has been muted using the remote control’s MUTE button.
  • Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL Numeric Keypad Menu 2. When the digit is highlighted, push the remote control’s ENTER button to select the digit. Repeat these steps until all digits are entered. 3. To delete the last digit, navigate to the Del button and push the remote control’s ENTER button.
  • Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 Options Menu When watching a video source (DVD Video with the disc in Play mode, Aux Video, etc.), pressing the “Options” button on the touchscreen activates the Options Settings menu. From this menu you can adjust Audio, Subtitles, Angle and Title.
  • Page 304 302 UNDERSTANDING YOUR INSTRUMENT PANEL If the screen is closed and there is no audio heard, verify DVD Audio Support that the headphones are turned on (the ON indicator is When a DVD-Audio disc is inserted in the DVD player, the illuminated) and the headphone selector switch is on the DVD-Audio title on the disc is played by default (most desired channel.
  • Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 • Open sessions are ignored. Only sessions that are closed Compressed Audio Files (MP3, WMA AND ACC) are playable. The DVD player is capable of playing MP3 (MPEG-1 Audio • For multi-session CDs that contain only multiple CD- Layer 3 with data bitrates from 32 to 320 kbit/s, including Audio sessions, the player will renumber the tracks so variable bit rates), WMA (All Standard 8.x, 9.x Windows...
  • Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL • Other compression formats such as AAC, MP3 Pro, Ogg Disc Errors Vorbis, and ATRAC3 will not play. The DVD player will If the DVD player is unable to read the disc, a Disc Error automatically skip the file and begin playing the next message is displayed on the Radio display and the disc is available file.
  • Page 307: Ipod/Usb/Mp3 Control

    UNDERSTANDING YOUR INSTRUMENT PANEL 305 Product Agreement STEERING WHEEL AUDIO CONTROLS This product incorporates copyright protection technology The remote sound system controls are located on the rear that is protected by U.S. patents and other intellectual surface of the steering wheel. The left and right-hand property rights.
  • Page 308: Left-Hand Switch Functions For Radio Operation

    306 UNDERSTANDING YOUR INSTRUMENT PANEL • Push the button in the center of the switch to change CD/DVD DISC MAINTENANCE modes (i.e., AM, FM, etc.). To keep a CD/DVD in good condition, take the following precautions: Left-Hand Switch Functions For Radio Operation •...
  • Page 309: Radio Operation And Mobile Devices

    UNDERSTANDING YOUR INSTRUMENT PANEL 307 RADIO OPERATION AND MOBILE DEVICES The radio manufacturer believes the internal wireless radio is safe for use by consumers. The level of energy emitted is Under certain conditions, an “on” mobile device in your far less than the electromagnetic energy emitted by wire- vehicle can cause erratic or noisy performance from your less devices such as mobile phones.
  • Page 310: Climate Controls

    308 UNDERSTANDING YOUR INSTRUMENT PANEL not installed and used in accordance with the instruc- Manual Three Zone Climate Controls With tions, may cause harmful interference to radio commu- Touchscreen — If Equipped nications. However, there is no guarantee that interfer- Buttons On The Faceplate ence will not occur in a particular installation.
  • Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 Buttons On The Touchscreen Buttons on the touchscreen are accessible on the Uconnect system screen. Manual Temperature Controls — Buttons On The Faceplate Radio 4.3 Manual 3 — Zone Temperature Controls — Buttons On The Touchscreen...
  • Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL 2. A/C Button Press and release to change the current setting, the indica- tor illuminates when A/C is ON. Performing this function again will cause the A/C operation to switch into manual mode and the A/C indicator will turn off. 3.
  • Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 5. Rear Defrost Button 6. Rear Climate Button — If Equipped Press and release this button to turn on the rear window Press and release this button to turn on the rear climate defroster and the heated outside mirrors (if equipped). An controls.
  • Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL 9. SYNC Button On The Touchscreen Use the small blower icon to reduce the blower setting and Press the Sync button on the touchscreen to toggle the Sync the large blower icon to increase the blower setting. Blower feature On/Off.
  • Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 NOTE: BI-LEVEL mode is designed under comfort condi- 14. Driver Temperature Control Up Button tions to provide cooler air out of the panel outlets and (Radio 8.4 Only) warmer air from the floor outlets. Provides the driver with independent temperature control. •...
  • Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL Climate Control Functions MAX A/C A/C (Air Conditioning) MAX A/C sets the control for maximum cooling perfor- mance. The Air Conditioning (A/C) button allows the operator to manually activate or deactivate the air conditioning sys- Press and release to toggle between MAX A/C and the tem.
  • Page 317: Rear Manual Temperature Control (Mtc) - If Equipped

    UNDERSTANDING YOUR INSTRUMENT PANEL 315 Recirculation Control The rear system temperature control buttons on the touch- screen are located in the Uconnect touch system, located on the instrument panel. When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, you may wish to recirculate interior air by pressing the Recirculation control button.
  • Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL Controlling The Rear Climate Controls From The Front Uconnect Touchscreen The Three-Zone climate control system allows for adjust- ment of the rear climate controls from the front ATC panel. To change the rear system settings: •...
  • Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 CAUTION! Interior air enters the Rear Automatic Temperature Control System through an intake grille, located in the right side trim panel. The rear outlets are located in the right side trim panel. Do not block or place objects directly in front of the inlet grille or heater outlets.
  • Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Mode Control Automatic Three Zone Temperature Control (ATC) With Touchscreen — If Equipped Headliner Mode Buttons On The Faceplate Air comes from the outlets in the headliner. Each of these outlets can be individually adjusted to direct Buttons on the faceplate are located on the left and right the flow of air.
  • Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 Buttons On The Touchscreen Buttons On The Touchscreen are accessible on the Uconnect system screen. Automatic Temperature Controls — Buttons On The Faceplate Radio 4.3 Automatic 3 — Zone Temperature Controls — Buttons On The Touchscreen...
  • Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL 2. A/C Button Press and release to change the current setting, the indica- tor illuminates when A/C is ON. Performing this function again will cause the A/C operation to switch into manual mode and the A/C indicator will turn off. 3.
  • Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 window defrosting and defogging. Performing this func- 7. Rear Climate Button — If Equipped tion will cause the ATC to switch into manual mode. If the Press and release this button to turn on the rear climate front defrost mode is turned off the climate system will controls.
  • Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL setting. Changing the passenger temperature setting while 12. Modes in Sync will automatically exit this feature. Sync will also The airflow distribution mode can be adjusted so air comes function with the rear climate controls. Changing the rear from the instrument panel outlets, floor outlets and demist climate control temperature setting will automatically exit outlets.
  • Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 • Floor Mode 16. Temperature Control (Radio 4.3) Air comes from the floor outlets. A slight Press the driver or passenger temperature button on the amount of air is directed through the defrost touchscreen to regulate the temperature of the air inside and side window demister outlets.
  • Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL MAX A/C NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The Recirculation mode MAX A/C sets the control for maximum cooling perfor- is not allowed in Defrost mode to improve window clear- mance.
  • Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 NOTE: The operator can also select the direction of the airflow by selecting one of the available mode settings. A/C operation • It is not necessary to move the temperature settings. The and Recirculation control can also be manually selected in system automatically adjusts the temperature, mode, Manual operation.
  • Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL The rear system temperature control buttons are located in the Uconnect system, located on the instrument panel. Uconnect 4.3 Automatic Rear Climate Buttons On The Touchscreen Uconnect 8.4 Automatic Rear Climate Buttons On The 1 — Blower Up Button 5 —...
  • Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 Controlling The Rear Climate Controls From The The rear ATC is located in the headliner, near the center of Front ATC Panel the vehicle. • Press the Rear Temperature Lock button on the Uconnect The Three-Zone ATC system allows for adjustment of the touchscreen.
  • Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: It is not necessary to move the temperature settings high. This allows the rear seat occupants to control the for cold or hot vehicles. The system automatically adjusts volume of air circulated in the rear of the vehicle. the temperature, mode and fan speed to provide comfort as quickly as possible.
  • Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 Rear Mode Control Operating Tips Auto Mode NOTE: Refer to the chart at the end of this section for suggested control settings for various weather conditions. • The rear system automatically maintains the correct mode and comfort level desired by the rear seat occu- Summer Operation pants.
  • Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly removed Make sure the air intake, located directly in front of the by turning the mode selector to Defrost. The Defrost/Floor windshield, is free of obstructions such as leaves. Leaves mode can be used to maintain a clear windshield and collected in the air intake may reduce airflow, and if they provide sufficient heating.
  • Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Manual Control Setting Suggestions For Various Weather Conditions...
  • Page 335 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....337 AUTOSTICK ......348 ▫...
  • Page 336 334 STARTING AND OPERATING ▫ Electronic Brake Force Distribution (EBD)..356 ▫ Tire Pressures For High Speed Operation ..377 ▫ Brake System Warning Light ....356 ▫...
  • Page 337 STARTING AND OPERATING 335 ▫ Premium System ..... . .390 ▫ Starting ......399 ▫...
  • Page 338 336 STARTING AND OPERATING ▫ Trailer Towing Weights (Maximum Trailer Weight ▫ Towing Tips ......412 Ratings) .
  • Page 339: Starting Procedures

    STARTING AND OPERATING 337 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the inside • Do not leave children or animals inside parked and outside mirrors, fasten your seat belt, and if present, vehicles in hot weather. Interior heat build-up may instruct all other occupants to buckle their seat belts.
  • Page 340: Keyless Enter-N-Go - Ignition

    338 STARTING AND OPERATING Keyless Enter-N-Go — Ignition To Turn Off The Engine Using ENGINE START/STOP Button This feature allows the driver to operate 1. Place the gear selector in PARK, then push and release the ignition switch with the push of a the ENGINE START/STOP button.
  • Page 341: Extreme Cold Weather (Below -22°F Or −30°C)

    STARTING AND OPERATING 339 NOTE: If the ignition is left in the ACC or ON/RUN Extreme Cold Weather (Below –22°F Or −30°C) (engine not running) position and the transmission is in To ensure reliable starting at these temperatures, use of an PARK, the system will automatically time out after 30 externally powered electric engine block heater (available minutes of inactivity and the ignition will switch to the...
  • Page 342: After Starting

    340 STARTING AND OPERATING Clearing A Flooded Engine (Using ENGINE ENGINE BLOCK HEATER — IF EQUIPPED START/STOP Button) The engine block heater warms the engine, and permits If the engine fails to start after you have followed the quicker starts in cold weather. Connect the cord to a “Normal Starting”...
  • Page 343: Automatic Transmission

    STARTING AND OPERATING 341 AUTOMATIC TRANSMISSION WARNING! (Continued) • Never leave children alone in a vehicle, or with WARNING! access to an unlocked vehicle. Allowing children to • It is dangerous to shift out of PARK or NEUTRAL if be in a vehicle unattended is dangerous for a number the engine speed is higher than idle speed.
  • Page 344: Ignition Park Interlock

    342 STARTING AND OPERATING NOTE: You must press and hold the brake pedal while Four-Speed Or Six-Speed Automatic Transmission shifting out of PARK. The transmission gear position display (located in the instrument cluster) indicates the transmission gear range. Ignition Park Interlock You must press the brake pedal to move the gear selector This vehicle is equipped with an Ignition Park Interlock out of PARK (refer to “Brake/Transmission Shift Interlock...
  • Page 345: Gear Ranges

    STARTING AND OPERATING 343 Moving the gear selector into the AutoStick (-/+) position Gear Ranges (below the Drive position) activates Autostick mode, pro- DO NOT race the engine when shifting from PARK or viding manual shift control and displaying the current gear NEUTRAL into another gear range.
  • Page 346 344 STARTING AND OPERATING When exiting the vehicle, always: WARNING! (Continued) • Apply the parking brake. engine is idling normally and your foot is firmly • Shift the transmission into PARK. pressing the brake pedal. • Unintended movement of a vehicle could injure •...
  • Page 347 STARTING AND OPERATING 345 REVERSE (R) WARNING! (Continued) This range is for moving the vehicle backward. Shift into the ignition in the ACC or ON/RUN mode. A child REVERSE only after the vehicle has come to a complete could operate power windows, other controls, or stop.
  • Page 348 346 STARTING AND OPERATING During cold temperatures, transmission operation may be CAUTION! (Continued) modified depending on engine and transmission tempera- Towing” in “Starting And Operating” and “Towing A ture as well as vehicle speed. This feature improves warm Disabled Vehicle” in “What To Do In Emergencies” for up time of the engine and transmission to achieve maxi- further information.
  • Page 349 STARTING AND OPERATING 347 In the event of a momentary problem, the transmission can Overdrive Operation be reset to regain all forward gears by performing the The automatic transmission includes an electronically con- following steps: trolled Overdrive (top gear). The transmission will auto- matically shift into Overdrive if the following conditions 1.
  • Page 350: Autostick

    348 STARTING AND OPERATING NOTE: The torque converter clutch will not engage until Operation the transmission fluid and engine coolant are warm (usu- When the gear selector is in the AutoStick position (below ally after 1 to 3 miles [2 to 5 km] of driving). Because the the DRIVE position), it can be moved from side to side.
  • Page 351: All Wheel Drive (Awd) - If Equipped

    STARTING AND OPERATING 349 • You can start out, from a stop, in any gear except top ALL WHEEL DRIVE (AWD) — IF EQUIPPED gear. Tapping (+) (at a stop) will allow starting in second This feature provides on-demand All-Wheel Drive (AWD). gear.
  • Page 352: Driving On Slippery Surfaces

    350 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slippery surface.
  • Page 353: Driving Through Water

    STARTING AND OPERATING 351 DRIVING THROUGH WATER WARNING! Driving through water more than a few inches/centimeters • Driving through standing water limits your vehicle’s deep will require extra caution to ensure safety and pre- traction capabilities. Do not exceed 5 mph (8 km/h) vent damage to your vehicle.
  • Page 354: Power Steering

    352 STARTING AND OPERATING If for some reason the power assist is interrupted, it will CAUTION! (Continued) still be possible to steer your vehicle. Under these condi- • Do not exceed 5 mph (8 km/h) when driving through tions, you will observe a substantial increase in steering standing water.
  • Page 355: Power Steering Fluid Check

    STARTING AND OPERATING 353 Power Steering Fluid Check PARKING BRAKE Checking the power steering fluid level at a defined service Before leaving the vehicle, make sure that the parking interval is not required. The fluid should only be checked brake is fully applied. Also, be certain to leave the trans- if a leak is suspected, abnormal noises are apparent, mission in PARK.
  • Page 356 354 STARTING AND OPERATING When the parking brake is applied with the ignition switch WARNING! ON, the “Brake Warning Light” in the instrument cluster • Never use the PARK position as a substitute for the will illuminate. parking brake. Always apply the parking brake fully NOTE: when parked to guard against vehicle movement and •...
  • Page 357: Brake System

    STARTING AND OPERATING 355 In the event power assist is lost for any reason (i.e., WARNING! (Continued) repeated brake applications with the engine OFF) the PARK. Failure to do so may cause the vehicle to roll brakes will still function. However, the effort required to and cause damage or injury.
  • Page 358: Electronic Brake Control System

    356 STARTING AND OPERATING ELECTRONIC BRAKE CONTROL SYSTEM If the “Brake System Warning Light” remains on or comes on while driving, it indicates that the brake system is not Your vehicle is equipped with an advanced Electronic functioning properly and that immediate service is re- Brake Control system (EBC).
  • Page 359 STARTING AND OPERATING 357 You also may experience the following when ABS activates: WARNING! (Continued) • The ABS motor noise (it may continue to run for a short • The ABS cannot prevent the natural laws of physics time after the stop). from acting on the vehicle, nor can it increase brak- •...
  • Page 360: Brake Assist System (Bas)

    358 STARTING AND OPERATING service is required. However, the conventional brake sys- WARNING! tem will continue to operate normally if the “Brake System Warning Light” is not on. The Brake Assist System (BAS) cannot prevent the natural laws of physics from acting on the vehicle, nor If the “Anti-Lock Brake Warning Light”...
  • Page 361 STARTING AND OPERATING 359 The following conditions must be met in order for HSA to WARNING! (Continued) activate: active driving involvement. It is always the driver’s • The feature must be enabled. responsibility to be attentive to distance to other ve- •...
  • Page 362 360 STARTING AND OPERATING For vehicles not equipped with the instrument cluster WARNING! (Continued) display, perform the following steps: or apply more vehicle brake pressure prior to releas- 1. Center the steering wheel (front wheels pointing ing the brake pedal. straight forward).
  • Page 363: Traction Control System (Tcs)

    STARTING AND OPERATING 361 Traction Control System (TCS) the intended path, ESC applies the brake of the appropriate wheel to assist in counteracting the oversteer or understeer This system monitors the amount of wheel spin of each of condition. the driven wheels. If wheel spin is detected, the TCS may •...
  • Page 364 362 STARTING AND OPERATING ESC Operating Modes WARNING! (Continued) NOTE: Depending upon model and mode of operation, the turns, driving on very slippery surfaces, or hydro- ESC system may have multiple operating modes. planing. ESC also cannot prevent accidents resulting from loss of vehicle control due to inappropriate ESC On driver input for the conditions.
  • Page 365 STARTING AND OPERATING 363 NOTE: ESC Activation/Malfunction Indicator Light and ESC OFF Indicator Light • When in “Partial Off” mode, the TCS functionality of ESC, (except for the limited slip feature described in the TCS section), has been disabled and the “ESC Off The “ESC Activation/Malfunction Indicator Indicator Light”...
  • Page 366: Electronic Roll Mitigation (Erm)

    364 STARTING AND OPERATING NOTE: Electronic Roll Mitigation (ERM) • The “ESC Activation/Malfunction Indicator Light” and This system anticipates the potential for wheel lift by the “ESC OFF Indicator Light” come on momentarily monitoring the driver’s steering wheel input and the speed each time the ignition switch is turned ON.
  • Page 367: Trailer Sway Control (Tsc)

    STARTING AND OPERATING 365 Trailer Sway Control (TSC) TIRE SAFETY INFORMATION TSC uses sensors in the vehicle to recognize an excessively Tire Markings swaying trailer and will take the appropriate actions to attempt to stop the sway. TSC will become active automati- cally once an excessively swaying trailer is recognized.
  • Page 368 366 STARTING AND OPERATING NOTE: tires is the same as for P-Metric tires except for the letters “LT” that are molded into the sidewall preceding the • P (Passenger) — Metric tire sizing is based on U.S. size designation. Example: LT235/85R16. design standards.
  • Page 369 STARTING AND OPERATING 367 EXAMPLE: 65, 85, 80 = Aspect ratio in percent (%) – Ratio of section height to section width of tire, or 10.5 = Section width in inches (in) R = Construction code – R means radial construction, or –...
  • Page 370: Tire Identification Number (Tin)

    368 STARTING AND OPERATING EXAMPLE: Maximum Load – Maximum load indicates the maximum load this tire is designed to carry Maximum Pressure – Maximum pressure indicates the maximum permissible cold tire inflation pressure for this tire Tire Identification Number (TIN) located on the white sidewall side of the tire.
  • Page 371: Tire Terminology And Definitions

    STARTING AND OPERATING 369 Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located be- hind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
  • Page 372: Tire Loading And Tire Pressure

    370 STARTING AND OPERATING Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Check the inflation pressure of each tire, including the spare tire (if equipped), at least monthly and inflate to the recommended pressure for your vehicle.
  • Page 373 STARTING AND OPERATING 371 Tire And Loading Information Placard WARNING! (Continued) • Improperly inflated tires are dangerous and can cause collisions. Under-inflation increases tire flex- ing and can result in over-heating and tire failure. Over-inflation reduces a tire’s ability to cushion shock.
  • Page 374 372 STARTING AND OPERATING Loading Steps For Determining Correct Load Limit— The vehicle maximum load on the tire must not exceed the (1) Locate the statement “The combined weight of load carrying capacity of the tire on your vehicle. You will occupants and cargo should never exceed XXX kg or not exceed the tire’s load carrying capacity if you adhere to XXX lbs.”...
  • Page 375 STARTING AND OPERATING 373 Metric Example For Load Limit cargo/luggage, and towing capacities of your vehicle with varying seating configurations and number and For example, if “XXX” amount equals 635 kg, and there size of occupants. This table is for illustration purposes will be five 68 kg passengers in your vehicle, the amount of only and may not be accurate for the seating and load available cargo and luggage load capacity is 295 kg (635-...
  • Page 376 374 STARTING AND OPERATING WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the rec- ommended load capacity for your vehicle. Never over- load them.
  • Page 377: Tires - General Information

    STARTING AND OPERATING 375 TIRES — GENERAL INFORMATION WARNING! (Continued) Tire Pressure • Overinflated or underinflated tires can affect vehicle handling and can fail suddenly, resulting in loss of Proper tire inflation pressure is essential to the safe and vehicle control. satisfactory operation of your vehicle.
  • Page 378: Tire Inflation Pressures

    376 STARTING AND OPERATING Fuel Economy CAUTION! Underinflated tires will increase tire rolling resistance After inspecting or adjusting the tire pressure, always resulting in higher fuel consumption. reinstall the valve stem cap. This will prevent moisture Tread Wear and dirt from entering the valve stem, which could damage the valve stem.
  • Page 379: Tire Pressures For High Speed Operation

    STARTING AND OPERATING 377 pressure should be increased by 3 psi (21 kPa), which Radial Ply Tires equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. WARNING! Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) Combining radial ply tires with other types of tires on during operation.
  • Page 380: Tire Types

    378 STARTING AND OPERATING Tire Types WARNING! All Season Tires — If Equipped Do not use Summer tires in snow/ice conditions. You All season tires provide traction for all seasons (Spring, could lose vehicle control, resulting in severe injury or Summer, Fall and Winter).
  • Page 381: Run Flat Tires - If Equipped

    STARTING AND OPERATING 379 While studded tires improve performance on ice, skid and Spare Tires — If Equipped traction capability on wet or dry surfaces may be poorer NOTE: For vehicles equipped with Tire Service Kit instead than that of non-studded tires. Some states prohibit stud- of a spare tire, please refer to the “Tire Service Kit”...
  • Page 382 380 STARTING AND OPERATING Compact Spare Tire — If Equipped WARNING! The compact spare is for temporary emergency use only. Compact and Collapsible spares are for temporary You can identify if your vehicle is equipped with a compact emergency use only. With these spares, do not drive spare by looking at the spare tire description on the Tire more than 50 mph (80 km/h).
  • Page 383 STARTING AND OPERATING 381 Do not install a wheel cover or attempt to mount a Limited Use Spare — If Equipped conventional tire on the collapsible spare wheel, since the The limited use spare tire is for temporary emergency use wheel is designed specifically for the collapsible spare tire.
  • Page 384: Tire Spinning

    382 STARTING AND OPERATING Tire Spinning When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s wheels above 30 mph (48 km/h) or for longer than 30 seconds continuously without stopping. Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies”...
  • Page 385: Life Of Tire

    STARTING AND OPERATING 383 Life Of Tire Keep dismounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with The service life of a tire is dependent upon varying factors oil, grease, and gasoline. including, but not limited to: Replacement Tires •...
  • Page 386: Tire Chains (Traction Devices)

    384 STARTING AND OPERATING It is recommended you contact your authorized tire dealer WARNING! (Continued) or original equipment dealer with any questions you may • Failure to equip your vehicle with tires having ad- have on tire specifications or capability. Failure to use equate speed capability can result in sudden tire equivalent replacement tires may adversely affect the failure and loss of vehicle control.
  • Page 387: Tire Rotation Recommendations

    STARTING AND OPERATING 385 WARNING! CAUTION! (Continued) • Observe the traction device manufacturer’s instruc- Using tires of different size and type (M+S, Snow) tions on the method of installation, operating speed, between front and rear axles can cause unpredictable and conditions for use. Always use the suggested handling.
  • Page 388: Department Of Transportation Uniform Tire Quality Grades

    386 STARTING AND OPERATING Refer to the “Maintenance Schedule” for the proper main- DEPARTMENT OF TRANSPORTATION UNIFORM tenance intervals. The reasons for any rapid or unusual TIRE QUALITY GRADES wear should be corrected prior to rotation being per- The following tire grading categories were established formed.
  • Page 389: Traction Grades

    STARTING AND OPERATING 387 Traction Grades Temperature Grades The Traction grades, from highest to lowest, are AA, A, The temperature grades are A (the highest), B, and C, B, and C. These grades represent the tire’s ability to stop representing the tire’s resistance to the generation of on wet pavement, as measured under controlled condi- heat and its ability to dissipate heat, when tested under tions on specified government test surfaces of asphalt...
  • Page 390: Tire Pressure Monitor System (Tpms)

    388 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) off until the tire pressure is at or above the recommended cold placard pressure. Once the low tire pressure warning The Tire Pressure Monitor System (TPMS) will warn the (Tire Pressure Monitoring Telltale Light) illuminates, you driver of a low tire pressure based on the vehicle recom- must increase the tire pressure to the recommended cold mended cold placard pressure.
  • Page 391 STARTING AND OPERATING 389 the tire pressure to rise to approximately 28 psi (193 kPa), CAUTION! (Continued) but the “Tire Pressure Monitoring Telltale Light” will still • After inspecting or adjusting the tire pressure, al- be on. In this situation, the “Tire Pressure Monitoring ways reinstall the valve stem cap.
  • Page 392: Premium System

    390 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire pressure gauge, even if under-inflation has not reached the level to trigger illumination of the “Tire Pressure Monitoring Telltale Light”.
  • Page 393 STARTING AND OPERATING 391 Tire Pressure Monitoring Low Pressure Warnings recommended cold placard pressure value. Once the sys- tem receives the updated tire pressures, the system will automatically update and the graphic display in the instru- The “Tire Pressure Monitoring Telltale Light” will ment cluster will change color back to the original color, illuminate in the instrument cluster and a chime and the “Tire Pressure Monitoring Telltale Light”...
  • Page 394 392 STARTING AND OPERATING • If you install the compact spare tire in place of a road tire If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no that has a pressure below the low-pressure warning longer exists, the “Tire Pressure Monitoring Telltale Light”...
  • Page 395: General Information

    STARTING AND OPERATING 393 • Once you repair or replace the original road tire and telltale and display the “SERVICE TPM SYSTEM” message reinstall it on the vehicle in place of the compact spare, in the instrument cluster display but dashes (--) will remain the TPMS will update automatically.
  • Page 396: Fuel Requirements

    394 STARTING AND OPERATING NOTE: Changes or modifications not expressly approved Poor quality gasoline can cause problems such as hard by the party responsible for compliance could void the starting, stalling, and hesitations. If you experience these user’s authority to operate the equipment. symptoms, try another brand of gasoline before consider- ing service for the vehicle.
  • Page 397: Gasoline/Oxygenate Blends

    STARTING AND OPERATING 395 Gasoline/Oxygenate Blends If a Non-FFV vehicle is inadvertently fueled with E-85 fuel, the engine will have some or all of these symptoms: Some fuel suppliers blend unleaded gasoline with oxygen- • Operate in a lean mode. ates such as ethanol.
  • Page 398: Materials Added To Fuel

    396 STARTING AND OPERATING The manufacturer recommends that gasoline without varnish removal may contain active solvents or similar MMT be used in your vehicle. The MMT content of ingredients. These can harm fuel system gasket and dia- gasoline may not be indicated on the gasoline pump, phragm materials.
  • Page 399: Carbon Monoxide Warnings

    STARTING AND OPERATING 397 CAUTION! (Continued) WARNING! (Continued) • Guard against carbon monoxide with proper main- additives is not the responsibility of the manufac- turer and may void or not be covered under the New tenance. Have the exhaust system inspected every Vehicle Limited Warranty.
  • Page 400: Ethanol Fuel (E-85)

    398 STARTING AND OPERATING Ethanol Fuel (E-85) Observing these precautions will avoid possible hard start- ing and/or driveability problems during warm up. E-85 is a mixture of approximately 85% ethanol and 15% unleaded gasoline. NOTE: • Use seasonally adjusted E-85 fuel (ASTM D5798). With WARNING! non-seasonally adjusted E-85 fuel, hard starting and rough idle following start up may be experienced even if...
  • Page 401: Starting

    STARTING AND OPERATING 399 additional requirements, developed during extensive fleet Replacement Parts testing, to provide additional protection to FCA US LLC All fuel and engine components in your Flexible Fuel engines. Vehicle (FFV) are designed to be compatible with ethanol. Ethanol compatible service components are required.
  • Page 402: Adding Fuel

    400 STARTING AND OPERATING ADDING FUEL WARNING! Fuel Filler Cap (Gas Cap) • Never have any smoking materials lit in or near the The gas cap is located behind the fuel filler door on the left vehicle when the gas cap is removed or the tank is side of the vehicle.
  • Page 403: Loose Fuel Filler Cap Message

    STARTING AND OPERATING 401 VEHICLE LOADING CAUTION! (Continued) The load carrying capacity of your vehicle is shown on the • To avoid fuel spillage and overfilling, do not “top “Vehicle Certification Label”. This information should be off” the fuel tank after filling. When the fuel nozzle used for passenger and luggage loading as indicated.
  • Page 404: Gross Vehicle Weight Rating (Gvwr)

    402 STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for The GVWR is the total allowable weight of your vehicle. operation.
  • Page 405: Trailer Towing

    STARTING AND OPERATING 403 TRAILER TOWING Gross Trailer Weight (GTW) In this section you will find safety tips and information on The GTW is the weight of the trailer plus the weight of all limits to the type of towing you can reasonably do with cargo, consumables and equipment (permanent or tempo- your vehicle.
  • Page 406 404 STARTING AND OPERATING Weight-Carrying Hitch WARNING! A weight-carrying hitch supports the trailer tongue weight, It is important that you do not exceed the maximum just as if it were luggage located at a hitch ball or some front or rear GAWR. A dangerous driving condition other connecting point of the vehicle.
  • Page 407: Trailer Hitch Classification

    STARTING AND OPERATING 405 Trailer Hitch Classification WARNING! The following chart provides the industry standard for the • An improperly adjusted Weight Distributing Hitch maximum trailer weight a given trailer hitch class can tow system may reduce handling, stability, braking per- and should be used to assist you in selecting the correct formance, and could result in a collision.
  • Page 408: Ratings)

    406 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain: GCWR (Gross Com- Max. GTW (Gross Max. Tongue Engine/Transmission Frontal Area bined Wt. Rating) Trailer Wt.) 2.4L/Automatic 6,000 lbs (2 721 kg) 22 sq ft...
  • Page 409: Trailer And Tongue Weight

    STARTING AND OPERATING 407 NOTE: • The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
  • Page 410: Towing Requirements

    408 STARTING AND OPERATING NOTE: Remember that everything put into or on the information. When towing a trailer, never exceed the trailer adds to the load on your vehicle. Also, additional GAWR, or GCWR, ratings. factory-installed options or authorized dealer-installed op- tions must be considered as part of the total load on your WARNING! vehicle.
  • Page 411 STARTING AND OPERATING 409 • Check the trailer tires for proper tire inflation pressures WARNING! (Continued) before trailer usage. • Vehicles with trailers should not be parked on a • Check for signs of tire wear or visible tire damage before grade.
  • Page 412 410 STARTING AND OPERATING • Trailer brakes are recommended for trailers over Towing Requirements — Trailer Lights And Wiring 1,000 lbs (453 kg) and required for trailers in excess of (If Equipped) 2,000 lbs (907 kg). Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for WARNING! motoring safety.
  • Page 413 STARTING AND OPERATING 411 Four-Pin Connector Seven-Pin Connector 1 — Female Pins 4 — Park 1 — Battery 5 — Ground 2 — Male Pin 5 — Left Stop/Turn 2 — Backup Lamps 6 — Left Stop/Turn 3 — Ground 6 —...
  • Page 414: Trailer Towing Weights

    412 STARTING AND OPERATING Towing Tips Speed Control — If Equipped • Do not use in hilly terrain or with heavy loads. Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from heavy •...
  • Page 415: Recreational Towing (Behind Motorhome, Etc.)

    STARTING AND OPERATING 413 Cooling System Highway Driving To reduce potential for engine and transmission overheat- Reduce speed. ing, take the following actions: Air Conditioning City Driving Turn off temporarily. When stopped for short periods, shift the transmission into NEUTRAL and increase engine idle speed. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition...
  • Page 416 414 STARTING AND OPERATING Recreational Towing CAUTION! (Continued) Front-Wheel Drive (FWD) Models • Towing this vehicle in violation of the above require- ments can cause severe transmission damage. Dam- Recreational towing is allowed ONLY if the front wheels age from improper towing is not covered under the are OFF the ground.
  • Page 417 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ... .416 JUMP-STARTING ......429 ▫...
  • Page 418: Hazard Warning Flashers

    416 WHAT TO DO IN EMERGENCIES • In city traffic — while stopped, place the transmission in HAZARD WARNING FLASHERS NEUTRAL, but do not increase engine idle speed. The Hazard Warning flasher switch is located in the instrument panel switch bank, above the climate controls. NOTE: There are steps that you can take to slow down an impending overheat condition: Push the switch to turn on the Hazard Warning...
  • Page 419: 2.4L Engine - If Equipped

    WHAT TO DO IN EMERGENCIES 417 WHEEL AND TIRE TORQUE SPECIFICATIONS CAUTION! Proper lug nut/bolt torque is very important to ensure that Driving with a hot cooling system could damage your the wheel is properly mounted to the vehicle. Any time a vehicle.
  • Page 420 418 WHAT TO DO IN EMERGENCIES Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. Torque Patterns After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly seated against Wheel Mounting Surface the wheel.
  • Page 421: Jacking And Tire Changing

    WHAT TO DO IN EMERGENCIES 419 JACKING AND TIRE CHANGING Jack Location — If Equipped The jack and jack-handle are stowed underneath a cover in WARNING! the rear storage bin in the cargo area. • Do not attempt to change a tire on the side of the vehicle close to moving traffic.
  • Page 422: Preparations For Jacking

    420 WHAT TO DO IN EMERGENCIES Preparations For Jacking Spare Tire Removal 1. Park the vehicle on a firm, level surface as far from the edge NOTE: On seven-passenger models, fold the third-row of the roadway as possible. Avoid icy or slippery areas. passenger seats flat.
  • Page 423: Spare Tire Stowage

    WHAT TO DO IN EMERGENCIES 421 NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together. Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward when seated on component 2.
  • Page 424: Jacking Instructions

    422 WHAT TO DO IN EMERGENCIES 3. Fit the assembled jack-handle over the winch drive nut. WARNING! (Continued) Rotate the jack-handle assembly clockwise to raise the • Set the parking brake firmly and set an automatic spare tire into the storage area. Continue to rotate the transmission in PARK.
  • Page 425 WHAT TO DO IN EMERGENCIES 423 Jacking Locations Jack Warning Label 1. Remove the spare tire, jack, and jack-handle from stow- age. CAUTION! 2. Loosen, but do not remove, the wheel nuts on the wheel with the flat tire. Turn the wheel nuts counterclockwise Do not attempt to raise the vehicle by jacking on one turn while the wheel is still on the ground.
  • Page 426 424 WHAT TO DO IN EMERGENCIES 3. Place the jack in the notches underneath the lift area that is closest to the flat tire. Center the jack saddle between the drain flute formations on the sill flange. Turn the jack screw clockwise to firmly engage the jack saddle with the lift area of the sill flange.
  • Page 427 WHAT TO DO IN EMERGENCIES 425 Rear Jacking Location Rear Jack Engaged With Jack Handle 4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tire.
  • Page 428 426 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Remove the wheel nuts. For vehicles so equipped, remove the wheel cover from the wheel by hand.
  • Page 429: Road Tire Installation

    WHAT TO DO IN EMERGENCIES 427 12. To stow the winch cable and retainer, fit the assembled WARNING! jack-handle over the winch drive nut. Rotate the jack- handle assembly clockwise until you hear the winch To avoid the risk of forcing the vehicle off the jack, do mechanism click three times.
  • Page 430 428 WHAT TO DO IN EMERGENCIES 3. Align the valve notch in the wheel cover with the valve WARNING! stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or To avoid the risk of forcing the vehicle off the jack, do excessive force to install the cover.
  • Page 431: Jump-Starting

    WHAT TO DO IN EMERGENCIES 429 7. After 25 miles (40 km), check the lug nut torque with a 5. After 25 miles (40 km), check the lug nut torque with a torque wrench to ensure that all lug nuts are properly torque wrench to ensure that all lug nuts are properly seated against the wheel.
  • Page 432: Preparations For Jump-Start

    430 WHAT TO DO IN EMERGENCIES Preparations For Jump-Start WARNING! The battery in your vehicle is located between the left front • Take care to avoid the radiator cooling fan whenever headlight assembly and the left front wheel splash shield. the hood is raised.
  • Page 433: Jump-Starting Procedure

    WHAT TO DO IN EMERGENCIES 431 4. If using another vehicle to jump-start the battery, park Connecting The Jumper Cables the vehicle within the jumper cables reach, set the 1. Connect the positive (+) end of the jumper cable to the parking brake and make sure the ignition is OFF.
  • Page 434: Freeing A Stuck Vehicle

    432 WHAT TO DO IN EMERGENCIES 6. Once the engine is started, remove the jumper cables in CAUTION! the reverse sequence: Accessories plugged into the vehicle power outlets Disconnecting The Jumper Cables draw power from the vehicle’s battery, even when not 1.
  • Page 435 WHAT TO DO IN EMERGENCIES 433 CAUTION! WARNING! Racing the engine or spinning the wheels may lead to Fast spinning tires can be dangerous. Forces generated transmission overheating and failure. Allow the en- by excessive wheel speeds may cause damage, or even gine to idle with the transmission in NEUTRAL for at failure, of the axle and tires.
  • Page 436: Gear Selector Override

    434 WHAT TO DO IN EMERGENCIES GEAR SELECTOR OVERRIDE 4. Press and maintain firm pressure on the brake pedal. If a malfunction occurs and the gear selector cannot be 5. Insert a screwdriver or similar small tool into the access moved out of the PARK position, you can use the following port, and push and hold the override release lever procedure to temporarily move the gear selector:...
  • Page 437 WHAT TO DO IN EMERGENCIES 435 Towing Condition Wheel OFF The Ground FWD MODELS AWD MODELS Flat Tow NONE IF transmission is oper- NOT ALLOWED able: Wheel Lift Or Dolly Tow Rear NOT ALLOWED • Transmission in NEU- TRAL • 25 mph (40 km/h) max speed •...
  • Page 438: All-Wheel Drive (Awd) Models

    436 WHAT TO DO IN EMERGENCIES If flatbed equipment is not available, and the transmission CAUTION! (Continued) is operable, the vehicle may be flat towed (with all four • Do not push or tow this vehicle with another vehicle wheels on the ground) under the following conditions: as damage to the bumper fascia and transmission •...
  • Page 439: Enhanced Accident Response System (Ears)

    WHAT TO DO IN EMERGENCIES 437 ENHANCED ACCIDENT RESPONSE SYSTEM (EARS) This vehicle is equipped with an Enhanced Accident Response System. Please refer to “Occupant Restraint Systems” in “Things To Know Before Starting Your Vehicle” for further information on the Enhanced Accident Response System (EARS) func- tion.
  • Page 441 MAINTAINING YOUR VEHICLE CONTENTS ▫ Air Conditioner Maintenance ....450 ENGINE COMPARTMENT — 2.4L ...441 ▫ A/C Air Filter — If Equipped ... . .451 ENGINE COMPARTMENT —...
  • Page 442 440 MAINTAINING YOUR VEHICLE ▫ Cleaning The Cupholders ....473 ▫ Front Fog Lamp ..... . .482 ▫...
  • Page 443: Engine Compartment - 2.4L

    MAINTAINING YOUR VEHICLE 441 ENGINE COMPARTMENT — 2.4L 1 — Engine Coolant Reservoir 7 — Power Distribution Center (Fuses) 2 — Power Steering Fluid Reservoir 8 — Air Cleaner Filter 3 — Engine Oil Fill 9 — Automatic Transmission Dipstick (4–Speed Only – If Equipped) 4 —...
  • Page 444: Engine Compartment - 3.6L

    442 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.6L 1 — Engine Coolant Reservoir 5 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 6 — Washer Fluid Reservoir 3 — Brake Fluid Reservoir 7 — Engine Oil Dipstick 4 — Power Distribution Center (Fuses) 8 —...
  • Page 445: Onboard Diagnostic System - Obd Ii

    MAINTAINING YOUR VEHICLE 443 ONBOARD DIAGNOSTIC SYSTEM — OBD II Onboard Diagnostic System (OBD II) Cybersecurity Your vehicle is equipped with a sophisticated onboard diag- Your vehicle is required to have an Onboard Diagnostic nostic system called OBD II. This system monitors the perfor- system (OBD II) and a connection port to allow access to mance of the emissions, engine, and automatic transmission information related to the performance of your emissions...
  • Page 446: Loose Fuel Filler Cap Message

    444 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message serviced, or recently had a dead battery or a battery replacement. If the OBD II system should be determined If the vehicle diagnostic system determines that the fuel not ready for the I/M test, your vehicle may fail the test. filler cap is loose, improperly installed, or damaged, the word “gASCAP”...
  • Page 447: Replacement Parts

    MAINTAINING YOUR VEHICLE 445 • The MIL will not flash at all and will remain fully DEALER SERVICE illuminated until you place the ignition in the off posi- Your authorized dealer has the qualified service personnel, tion or start the engine. This means that your vehicle’s special tools, and equipment to perform all service opera- OBD II system is ready and you can proceed to the I/M tions in an expert manner.
  • Page 448: Engine Oil

    446 MAINTAINING YOUR VEHICLE Besides those maintenance items specified in the fixed Engine Oil “Maintenance Schedule”, there are other components Checking Oil Level which may require servicing or replacement in the future. To assure proper engine lubrication, the engine oil must be maintained at the correct level.
  • Page 449 MAINTAINING YOUR VEHICLE 447 American Petroleum Institute (API) Engine Oil CAUTION! Identification Symbol Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure This symbol means that the oil has been and an increase in oil temperature.
  • Page 450 448 MAINTAINING YOUR VEHICLE The engine oil filler cap also shows the recommended Lubricants which do not have both the engine oil certifi- engine oil viscosity for your engine. For information on the cation mark and the correct SAE viscosity grade number engine oil filler cap location, refer to “Engine Compart- should not be used.
  • Page 451: Engine Oil Filter

    MAINTAINING YOUR VEHICLE 449 Engine Oil Filter WARNING! (Continued) The engine oil filter should be replaced with a new filter at near the engine compartment before starting the ve- every engine oil change. hicle with the air induction system (air cleaner, hoses, etc.) removed.
  • Page 452: Air Conditioner Maintenance

    450 MAINTAINING YOUR VEHICLE To access the battery, turn the steering wheel fully to the CAUTION! right and remove the access panel from the inner fender • It is essential when replacing the cables on the shield. battery that the positive cable is attached to the WARNING! positive post and the negative cable is attached to the negative post.
  • Page 453: A/C Air Filter - If Equipped

    MAINTAINING YOUR VEHICLE 451 Refrigerant Recovery And Recycling HFO 1234yf WARNING! HFO 1234yf Air Conditioning Refrigerant is a hydro- • Use only refrigerants and compressor lubricants ap- fluoolefine HFO that is endorsed by the Environmental proved by the manufacturer for your air conditioning Protection Agency and is an ozone-saving product.
  • Page 454 452 MAINTAINING YOUR VEHICLE The A/C air filter is located in the fresh air inlet behind the 4. Disengage the two retaining tabs that secure the filter glove compartment. Perform the following steps to replace cover to the HVAC housing and remove the cover. the filter: 1.
  • Page 455: Body Lubrication

    MAINTAINING YOUR VEHICLE 453 The external lock cylinders should be lubricated twice a CAUTION! year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant, such as Mopar Lock The cabin air filter is identified with an arrow to Cylinder Lubricant directly into the lock cylinder.
  • Page 456 454 MAINTAINING YOUR VEHICLE Rear Wiper Blade Removal/Installation 3. Grab the bottom of the wiper blade and rotate it forward to unsnap the blade pivot pin from the wiper blade holder. 1. Lift the pivot cap on the rear wiper arm upward, this will allow the rear wiper blade to be raised off of the liftgate glass.
  • Page 457: Adding Washer Fluid

    MAINTAINING YOUR VEHICLE 455 Adding Washer Fluid WARNING! The windshield washer and the rear window washer share Commercially available windshield washer solvents the same fluid reservoir. The fluid reservoir is located in the are flammable. They could ignite and burn you. Care engine compartment.
  • Page 458 456 MAINTAINING YOUR VEHICLE WARNING! CAUTION! (Continued) • Damage to the catalytic converter can result if your • Exhaust gases can injure or kill. They contain carbon vehicle is not kept in proper operating condition. In monoxide (CO), which is colorless and odorless. the event of engine malfunction, particularly involv- Breathing it can make you unconscious and can ing engine misfire or other apparent loss of perfor-...
  • Page 459: Cooling System

    MAINTAINING YOUR VEHICLE 457 To minimize the possibility of catalytic converter damage: WARNING! (Continued) • Do not shut off the engine or interrupt the ignition, • You or others can be badly burned by hot engine when the transmission is in gear and the vehicle is in coolant (antifreeze) or steam from your radiator.
  • Page 460 458 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush And Refill CAUTION! (Continued) NOTE: Some vehicles require special tools to add coolant Additive Technology (OAT) engine coolant is differ- properly. Failure to fill these systems properly could lead to ent and should not be mixed with Hybrid Organic severe internal engine damage.
  • Page 461 MAINTAINING YOUR VEHICLE 459 • Use only high purity water such as distilled or deionized Adding Coolant water when mixing the water/engine coolant (anti- Your vehicle has been built with an improved engine freeze) solution. The use of lower quality water will coolant (OAT coolant conforming to MS.90032) that allows reduce the amount of corrosion protection in the engine extended maintenance intervals.
  • Page 462 460 MAINTAINING YOUR VEHICLE Cooling System Pressure Cap Disposal Of Used Engine Coolant The cap must be fully tightened to prevent loss of engine Used ethylene glycol-based engine coolant (antifreeze) is a coolant (antifreeze), and to ensure that engine coolant regulated substance requiring proper disposal.
  • Page 463 MAINTAINING YOUR VEHICLE 461 • If frequent engine coolant (antifreeze) additions are coolant freeze point or replacing engine coolant (anti- freeze). Advise your service attendant of this. As long as required, the cooling system should be pressure tested the engine operating temperature is satisfactory, the cool- for leaks.
  • Page 464: Brake System

    462 MAINTAINING YOUR VEHICLE Brake System Overfilling of fluid is not recommended because it may cause leaking in the system. In order to assure brake system performance, all brake system components should be inspected periodically. Refer Fluid level can be expected to fall as the brake pads wear. to the “Maintenance Schedule”...
  • Page 465: Automatic Transmission

    MAINTAINING YOUR VEHICLE 463 Automatic Transmission WARNING! (Continued) Selection Of Lubricant • To avoid contamination from foreign matter or mois- ture, use only new brake fluid or fluid that has been It is important to use the proper transmission fluid to in a tightly closed container.
  • Page 466 464 MAINTAINING YOUR VEHICLE Special Additives 2. Run the engine at normal idle speed for at least 60 seconds, and leave the engine running for the rest of this The manufacturer strongly recommends against using any procedure. special additives in the transmission. 3.
  • Page 467 MAINTAINING YOUR VEHICLE 465 7. Wipe the dipstick clean and reinsert it until seated. correctly established at 80°F (27°C), it should be between Then, remove the dipstick and note the fluid level on the HOT (upper) reference holes when the transmission both sides.
  • Page 468: Rear Drive Assembly (Rda) - Awd Models Only

    466 MAINTAINING YOUR VEHICLE Fluid Level Check — Six-Speed Automatic In addition, change the fluid and filter if the fluid becomes Transmission contaminated (with water, etc.), or if the transmission is disassembled for any reason. The fluid level is preset at the factory and does not require adjustment under normal operating conditions.
  • Page 469: Power Transfer Unit (Ptu) - Awd Models Only

    MAINTAINING YOUR VEHICLE 467 Power Transfer Unit (PTU) – AWD Models Only trees and road surfaces during other seasons are highly corrosive to the metal in your vehicle. Outside parking, Lubricant Selection which exposes your vehicle to airborne contaminants, road Use only the manufacturer’s recommended fluid.
  • Page 470 468 MAINTAINING YOUR VEHICLE Washing Special Care • Wash your vehicle regularly. Always wash your vehicle • If you drive on salted or dusty roads, or if you drive near in the shade using Mopar Car Wash, or a mild car wash the ocean, hose off the undercarriage at least once a soap, and rinse the panels completely with clear water.
  • Page 471 MAINTAINING YOUR VEHICLE 469 Wheel And Wheel Trim Care CAUTION! (Continued) All wheels and wheel trim, especially aluminum and covered by the New Vehicle Limited Warranty. Only chrome plated wheels, should be cleaned regularly using car wash soap, Mopar Wheel Cleaner or equivalent is mild (neutral Ph) soap and water to maintain their luster recommended.
  • Page 472 470 MAINTAINING YOUR VEHICLE NOTE: If you intend parking or storing your vehicle for an Stain Repel Fabric Cleaning Procedure — If extended period after cleaning the wheels with wheel Equipped cleaner, drive your vehicle for a few minutes before doing Stain Repel seats may be cleaned in the following manner: so.
  • Page 473 MAINTAINING YOUR VEHICLE 471 Your leather upholstery can be best preserved by regular CAUTION! (Continued) cleaning with a damp soft cloth. Small particles of dirt can • Damage caused by these type of products may not be act as an abrasive and damage the leather upholstery and covered by your New Vehicle Limited Warranty.
  • Page 474 472 MAINTAINING YOUR VEHICLE Glass Surfaces Seat Belt Maintenance All glass surfaces should be cleaned on a regular basis with Do not bleach, dye, or clean the belts with chemical Mopar Glass Cleaner, or any commercial household-type solvents or abrasive cleaners. This will weaken the fabric. glass cleaner.
  • Page 475: Cleaning The Cupholders

    MAINTAINING YOUR VEHICLE 473 Cleaning The Cupholders WARNING! (Continued) Clean with a damp cloth or towel using a mild detergent. • Before replacing a fuse, make sure that the ignition is off and that all the other services are switched off FUSES and/or disengaged.
  • Page 476: Interior Fuses

    474 MAINTAINING YOUR VEHICLE Interior Fuses The interior fuse panel is located on the passenger side under the instrument panel. Cavity Cartridge Fuse Mini-Fuse Description F100 30 Amp Pink – 110V AC Inverter – If Equipped F101 – 10 Amp Red Interior Lights F102 –...
  • Page 477 MAINTAINING YOUR VEHICLE 475 Cavity Cartridge Fuse Mini-Fuse Description F117 – 10 Amp Red Heated Mirrors F118 – 10 Amp Red Occupant Restraint Controller F119 – 10 Amp Red Steering Column Control Module F120 – 10 Amp Red All Wheel Drive – If Equipped F121 –...
  • Page 478: Underhood Fuses (Power Distribution Center)

    476 MAINTAINING YOUR VEHICLE Underhood Fuses (Power Distribution Center) The power distribution center is located in the engine compartment. Power Distribution Center Cavity Cartridge Fuse Mini-Fuse Description F101 60 Amp Yellow – Interior Power Distribution Center Rail F102 60 Amp Yellow –...
  • Page 479 MAINTAINING YOUR VEHICLE 477 Cavity Cartridge Fuse Mini-Fuse Description F141 40 Amp Green – Anti-Lock Brake System F142 40 Amp Green – Glow Plugs – If Equipped F143 40 Amp Green – Exterior Lights 1 F144 40 Amp Green – Exterior Lights 2 F145 30 Amp Pink...
  • Page 480 478 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description F162 40 Amp Red/20 – Cabin Heater #1/Vacuum Pump – If Amp Lt. Blue Equipped F163 50 Amp Red – Cabin Heater #2 – If Equipped F164 – 25 Amp Clear Powertrain Auto Shutdown F165 –...
  • Page 481: Replacement Bulbs

    MAINTAINING YOUR VEHICLE 479 Cavity Cartridge Fuse Mini-Fuse Description F181 100 Amp Blue – Electrohydraulic Steering (EHPS) – If Equipped F182 50 Amp Red – Cabin Heater #3 – If Equipped F184 30 Amp Pink – Front Wiper Motor REPLACEMENT BULBS Interior Bulbs Bulb Number Courtesy/Reading Lamps (Incandescent)
  • Page 482 480 MAINTAINING YOUR VEHICLE Bulb Number Front Fog Lamp PSX24W or 2504 Center High Mounted Stop Lamp (CHMSL) LED (Serviced at authorized dealer) License Lamp Exterior Bulbs – Rear (LED Version) Bulb Number Rear Tail/Stop Lamp LED (Serviced at authorized dealer) Rear Tail (Liftgate) Lamp LED (Serviced at authorized dealer) Rear Turn Signal Lamp...
  • Page 483: Bulb Replacement

    MAINTAINING YOUR VEHICLE 481 BULB REPLACEMENT NOTE: Lens fogging can occur under certain atmospheric conditions. This will usually clear as atmospheric condi- tions change to allow the condensation to change back into a vapor. Turning the lamps on will usually accelerate the clearing process.
  • Page 484: Front Fog Lamp

    482 MAINTAINING YOUR VEHICLE CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the head- lamp housing and rotate it ¼...
  • Page 485: Rear Turn Signal And Backup Lamp

    MAINTAINING YOUR VEHICLE 483 4. Install the replacement bulb and connector assembly straight into the fog lamp until it locks into place. 5. Reinstall the front lower wheel well access panel and fasteners. Rear Turn Signal And Backup Lamp The tail lamps are a two-piece design. The tail/stop/rear turn signal lamps are located in the rear corner body panels.
  • Page 486 484 MAINTAINING YOUR VEHICLE 6. Install the bulb and connector assembly into the tail trim stick and hand pressure together to disengage the lamp housing and rotate the connector ¼ turn clockwise tail lamp housing from the liftgate. to lock it in place. 7.
  • Page 487: License Plate Lamp

    MAINTAINING YOUR VEHICLE 485 License Plate Lamp 2. Insert a small flat-blade tool between the end of the lens with the locking tab and the surrounding housing and 1. Push the small locking tab sticking out of the end of the then pivot the tool to separate the lens from the housing.
  • Page 488: Fluid Capacities

    486 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Metric Fuel (Approximate) Front Wheel Drive (FWD) Models 20.5 Gallons 77.6 Liters All-Wheel Drive Models 21 Gallons 79.8 Liters Engine Oil With Filter 2.4L Engine (SAE 5W-20, API Certified) 4.5 Quarts 4.26 Liters 3.6L Engine (SAE 5W-20, API Certified) 6 Quarts 5.6 Liters...
  • Page 489: Fluids, Lubricants, And Genuine Parts

    MAINTAINING YOUR VEHICLE 487 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix.
  • Page 490 488 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine dam- be compatible with the radiator engine coolant and age and may decrease corrosion protection.
  • Page 491: Chassis

    MAINTAINING YOUR VEHICLE 489 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use only ATF+4 Automatic Transmission Fluid. Failure to use ATF+4 fluid may affect the function or per- formance of your transmission. We recommend Mopar ATF+4 fluid. Power Transfer Unit (PTU) We recommend you use Mopar Gear Lubricant 75W-90.
  • Page 493 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart ..... .493 MAINTENANCE SCHEDULE ....492...
  • Page 494 492 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE NOTE: Under no circumstances should oil change inter- vals exceed 10,000 miles (16,000 km), twelve months or 350 Your vehicle is equipped with an automatic oil change hours of engine run time, whichever comes first. The 350 indicator system.
  • Page 495 MAINTENANCE SCHEDULES 493 Maintenance Chart At Every Oil Change Interval As Indicated By Oil Change Indicator System: Required Maintenance Intervals. • Inspect automatic transmission fluid if equipped Refer to the Maintenance Schedules on the following page with dipstick. for the required maintenance intervals. •...
  • Page 496 494 MAINTENANCE SCHEDULES Mileage or time passed (which- ever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Additional Maintenance Replace engine air filter.
  • Page 497 MAINTENANCE SCHEDULES 495 Mileage or time passed (which- ever comes first) Or Years: Or Kilometers: Change the automatic transmis- sion fluid and filter. Change the automatic transmis- sion fluid and filter if using your vehicle for any of the following: police, taxi, fleet, or frequent trailer towing.
  • Page 498 496 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
  • Page 499 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ......498 Impaired (TDD/TTY) .
  • Page 500: Suggestions For Obtaining Service For Your Vehicle

    498 IF YOU NEED CONSUMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE FOR IF YOU NEED ASSISTANCE YOUR VEHICLE The manufacturer and its authorized dealer are vitally interested in your satisfaction. We want you to be happy Prepare For The Appointment with our products and services. If you are having warranty work done, be sure to bring the right papers with you, as well as your warranty folder.
  • Page 501: Fca Us Llc Customer Center

    IF YOU NEED CONSUMER ASSISTANCE 499 Any communication to the manufacturer’s customer center In Mexico Contact should include the following information: Av. Prolongacion Paseo de la Reforma, 1240 • Owner’s name and address Sante Fe C.P. 05109 • Owner’s telephone number (home and office) Mexico, D.
  • Page 502: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)

    500 IF YOU NEED CONSUMER ASSISTANCE Customer Assistance For The Hearing Or Speech questions about the service contract, call the manufactur- er’s Service Contract National Customer Hotline at 1-800- Impaired (TDD/TTY) 521-9922 (Canadian residents, call (800) 465-2001 English / To assist customers who have hearing difficulties, the (800) 387-9983 French).
  • Page 503: Warranty Information

    IF YOU NEED CONSUMER ASSISTANCE 501 REPORTING SAFETY DEFECTS WARNING! In The 50 United States And Washington, D.C. Engine exhaust (internal combustion engines only), If you believe that your vehicle has a defect that could some of its constituents, and certain vehicle compo- cause a crash or cause injury or death, you should nents contain, or emit, chemicals known to the State of immediately inform the National Highway Traffic...
  • Page 504: In Canada

    502 IF YOU NEED CONSUMER ASSISTANCE In Canada Diagnostic Procedure Manuals If you believe that your vehicle has a safety defect, you Diagnostic Procedure Manuals are filled with diagrams, should contact the Customer Service Department immedi- charts and detailed illustrations. These practical manuals ately.
  • Page 505 INDEX...
  • Page 506 504 INDEX About Your Brakes ..... .353, 355 Air Conditioning Filter..... . .451 Adding Engine Coolant (Antifreeze) .
  • Page 507 INDEX 505 Fluid And Filter Changes ....466 Brake Assist System ......358 Fluid Level Check .
  • Page 508 506 INDEX Cargo Compartment ......219 Older Children And Child Restraints ...63 Luggage Carrier .
  • Page 509 INDEX 507 Drain, Flush, And Refill ....458 Disposal Inspection ......460 Antifreeze (Engine Coolant) .
  • Page 510 508 INDEX Electronic Stability Control (ESC) ....361 Oil Change Interval ..... . .253 Electronic Throttle Control Warning Light .
  • Page 511 INDEX 509 Flashers Folding Rear Seat ..... . .165, 171 Hazard Warning ......416 Freeing A Stuck Vehicle .
  • Page 512 510 INDEX Gas Cap (Fuel Filler Cap) ....400, 444 On With Wipers ..... .175, 182 Gasoline, Clean Air .
  • Page 513 INDEX 511 Instrument Panel Lens Cleaning ....472 Keyless Entry System ......16 Interior Appearance Care .
  • Page 514 512 INDEX Cruise ....... .250 Reading .......179 Daytime Running .
  • Page 515 INDEX 513 Door ........22 Rearview .......91 Power Door .
  • Page 516 514 INDEX Materials Added To ..... . .448 Phone (Uconnect) ......96, 113 Pressure Warning Light .
  • Page 517 INDEX 515 Programming Key Fobs (Remote Keyless Entry)..16 Reminder, Lights On ......176 Reminder, Seat Belt .
  • Page 518 516 INDEX Rotation, Tires ......385 Inspection ......84 Operating Instructions .
  • Page 519 INDEX 517 Service Contract ......500 Steering Service Manuals ......502 Column Controls .
  • Page 520 518 INDEX Tire Markings ......365 Tread Wear Indicators .....382 Tires.
  • Page 521 INDEX 519 Transmission Call Controls ......103, 125 Automatic ......341, 463 Cancel Command .
  • Page 522 520 INDEX Unleaded Gasoline ......394 Water Untwisting Procedure, Seat Belt ....41 Driving Through .
  • Page 523 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
  • Page 524 STICK WITH THE SPECIALISTS ® 17JC49-126-AC Third Edition ©2016 FCA US LLC. All Rights Reserved. Dodge is a registered trademark of FCA US LLC. Printed in U.S.A.

Table of Contents