Dodge Journey 2018 User Manual page 177

Displaying The Time
• If the time is not currently displayed at the top
of the screen when in Radio mode, push the
SETTINGS button, then press "Clock." Select
"Show Time," then press "On."
Setting The Time
• Push the SETTINGS button on the faceplate,
then press the "Clock" button on the touch-
screen.
• Press the "Time" button on the touchscreen.
• Press the "Up or Down" buttons on the touch-
screen to adjust the hours, minutes or AM/
PM.
NOTE:
12hr format and 24hr format can also be set.
• Once the time is set press the "Done" button
on the touchscreen to exit the time screen.
Audio Settings
• Push the SETTINGS button on the faceplate
on the right side of the unit.
• Then scroll down and press the "Audio" but-
ton on the touchscreen to get to the Audio
menu.
• The Audio Menu shows the following options
for you to customize your audio settings:
– Equalizer
– Balance/Fade
– Speed Adjust Volume
• Press the "Exit" button on the touchscreen to
exit from the Audio Menu.
Equalizer
• Press the "Equalizer" button on the touch-
screen to adjust the Bass, Mid and Treble. Use
the "+" or "–" button on the touchscreen to
adjust the equalizer to your desired settings.
Press the "Done" button on the touchscreen
when done.
Balance/Fade
• Press the "Balance/Fade" button on the
touchscreen to adjust the sound from the
speakers. Use the "arrow" button on the
touchscreen to adjust the sound level from the
front and rear or right and left side speakers.
Press the center "C" button on the touch-
screen to reset the balance and fade to the
factory setting. Press the "Done" button on
the touchscreen when done.
Speed Adjust Volume
• Press the "Speed Adjust Volume" button on
the touchscreen to select between OFF, 1, 2 or
3. This will decrease the radio volume relative
to a decrease in vehicle speed. Press the
"Done" button on the touchscreen when
done.
175