Dodge Journey 2018 User Manual page 201

Making A Phone Call
To begin a phone call using Uconnect Voice
Command:
• Push the Uconnect Phone button
• After the BEEP, say "dial" then the number (or
"call" then the name as listed in your phone;
see Phonebook).
NOTE:
You can also initiate a call by using the touch-
screen on the Phone main screen.
Receiving A Call — Accept (And End)
• When an incoming call rings/is announced on
Uconnect, push the Phone button
• To end a call, push the Phone button
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212"
• "Call Emergency"
• "Call Towing Assistance"
• "Redial"
Mute (Or Unmute) Microphone During Call
• During a call, press the "mute" button on the
touchscreen to mute and unmute the call.
.
Transfer Ongoing Call Between Handset
And Vehicle
During an on-going call, press the "Transfer"
button on the touchscreen to transfer an on-
going call between handset and vehicle.
Phonebook
• Uconnect radios will automatically download
your phonebook from your paired phone, if
this feature is supported by your phone. En-
tries are updated each time that the phone is
.
connected. If your phone book entries do not
.
appear, check the settings on your phone.
Some phones require you to enable this fea-
ture manually.
• Your phonebook can be browsed on your radio
screen, but editing can only be done on your
phone. To browse, press the "Phone" button
on the touchscreen, then the "Phonebook"
button on the touchscreen.
• Favorite phonebook entries can be saved as
Favorites for quicker access. Favorites are
shown at the top of your main phone screen.
Voice Command Tips (3/3 NAV Only)
• Using complete names (i.e; Call John Doe vs.
Call John) will result in greater system accu-
racy.
• You can "chain" commands together for
faster results. Say "Call John Doe mobile," for
example.
• If you are listening to available voice com-
mand options, you do not have to listen to the
entire list. When you hear the command that
you need, press the
steering wheel, wait for the beep and say your
command.
Changing The Volume
• Start a dialogue by pressing the Phone button
, then say a command for example -
"Help."
• Use the radio ON/OFF VOLUME rotary knob to
adjust the volume to a comfortable level while
the Uconnect system is speaking. Please note
the volume setting for Uconnect is different
than the audio system.
button on the
199