SMA SUNNY TRIPOWER CORE1 Operating Manual page 48

7 Commissioning
Configuring the Installation Assistant (Recommended)
A
C
Figure 14: Layout of the installation assistant (example)
Position Designation
A Configuration steps
B User information
C Configuration field
Procedure:
1. Select the configuration option Configuration with Installation Assistant.
☑ The installation assistant will open.
2. Follow the installation assistant steps and make the settings appropriate for your system.
3. For every setting made in a step, select [Save and next].
☑ In the last step, all made settings are listed in a summary.
4. To save the settings to a file, select [Export a summary] and save the file on your computer,
tablet PC or smartphone.
5. To correct settings you made, select [Back], navigate to the desired step, correct settings and
select [Save and continue].
6. Once all settings are correct, select [Next] in the summary.
☑ The start page of the user interface opens.
Manual configuration
You can configure the inverter manually by setting the desired parameters.
48 STP50-40-BE-en-12
Description
Overview of the installation assistant steps. The number of
steps depends on the type of device and the additionally
installed modules. The current step is highlighted in blue.
Information about the current configuration step and the
setting options of the configuration step.
You can make settings in this field.
SMA Solar Technology AG
B
Operating manual