Table of Contents
Advertisement
2
A = Position of the screw for the upper drive
B = Position of the screw for the lower drive
Slide the drive into the system unit (1).
Plug the data and the power supply connectors into the drive.
Fasten the drive with the screw (2).
If you have removed the chipcard reader, then reinstall it.
Close the system unit (see
If necessary, you must adapt the entry for the drive in the Setup menu.
i
A26361-K520-Z100-1-7619
1
A
B
"Assembling the system
System expansions
unit").
35
Advertisement
Table of Contents
