System expansions
Installing and removing the hard disk drive
Harddiskdrive,
Harddiskdrive,
Harddiskdrive,
Removing a hard disk drive
► Open the casing (see
Harddisk drive,
► Disconnect all cables connected to the drive and fan (data cable, power supply cable).
► Loosen the screws (1).
► Pull the drive backwards a short way out of the bay in the direction of the arrow (2).
The drive now protrudes slightly out of the bay.
► Pull the drive completely out of its bay. Make sure that you are not touching other components.
► If necessary, make the required settings on the remaining hard disk drive.
► Close the casing (see
It may be necessary to modify the entry for the remaining drives in the BIOS Setup.
44
"Opening the casing", Page
1
"Closing the casing", Page
31).
1
2
32).
A26361-K1007-Z220-1-7619, edition 1