Table of Contents
Advertisement
1
a
Push the rear slot cover plate into the slot (1). Ensure that the point of the cover engages into
the guide (a).
Replace the clip (2) which fixes the board. Make sure that the clip engages when released (3).
Close the system unit (see
If you have installed or removed a PCI board, please check in the BIOS Setup the settings
i
for the relevant PCI slot. If necessary, change the settings. Further information is provided
in the documentation for the PCI board.
A26361-K520-Z100-1-7619
2
3
"Assembling the system
System expansions
unit").
33
Advertisement
Table of Contents
