For The United States And Canada - Fujitsu SCENIC6511 Operating Manual

Important notes

For the United States and Canada

Use a UL listed and CSA labeled cord set consisting of a three conductor cord with a maximum
length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit. Please consult Table A
for the selection criteria for power cords used in the United States and Canada.
Table A:
Cord Type
SJT
SVT
For units set at 115 V:
use a parallel blade, grounding type
attachment plug rated 15 A, 125 V.
For units set at 230 V (outside of the United States and Canada):
use a cord set consisting of a minimum AWG according to Table A and a grounding type attachment
plug rated 15 A, 250 V. The cord set should have the appropriate safety approvals for the country in
which the equipment will be installed and should be marked HAR.
6
Size of Conductors
in Cord
18 AWG
16 AWG
14 AWG
18 AWG
17 AWG
For units set at 230 V (domestic use):
use a tandem blade, grounding type
attachment plug rated 15 A, 250 V.
Power cord selection
Maximum Current
Rating of Unit
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
A26361-K520-Z100-1-7619