Assembly - Gold's Gym CWTL05607.4 User Manual

Table of Contents

Advertisement

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly re-
quires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of
the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated
with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or the
shipping carton. This is normal and does not affect treadmill performance. If there is lubricant on top of the walk-
ing belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the
included hex key
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. Extra hardware may be included. To avoid damaging parts, do not
use power tools for assembly.
3/8" Star
5/16" Star
Washer
Washer
(23)–8
(8)–4
Extension Leg Nut
(67)–4
#8 x 1" Tek
Screw (83)–4
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (58) so that the treadmill is more stable;
do not fully fold the Frame yet.
Identify the Right Upright (107), and have a sec-
ond person hold it near the Base (108) at the
angle shown.
See the inset drawing. Tie the wire tie in the
Right Upright (107) securely around the Upright
Wire (77). Then, pull the other end of the wire
tie until the Upright Wire is routed through the
Right Upright. Make sure that the Upright
Wire does not fall into the Right Upright.
and your own Phillips screwdriver
1/4" Flat
5/16" x 1" Bolt
Washer
(50)–4
3/8" x 1" Bolt
(106)–2
1/4" x 4 1/2" Bolt (103)–4
(64)–4
3/8" x 2 3/4" Bolt (105)–2
1
107
58
6
.
5/16" x 2 1/4" Bolt (65)–4
77
Wire Tie
108
77
77
107
Wire
Tie

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxx crosswalk 650

Table of Contents