Assembly - Gold's Gym Preview 1000 User Manual

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
(84)–2
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
Extension Leg Bolt (96)–4
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key
For help identifying the assembly hardware, see the drawings below. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of the manual. The number following the
parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is
preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging
plastic parts, do not use power tools for assembly.
Extension Leg Nut (67)–4
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown. Partially
fold the Frame (58) so the treadmill is more sta-
ble. Do not fully fold the Frame until the
treadmill is completely assembled.
Attach two Base Pads (82) to the base of the
Uprights (84) with two 1" Tek Screws (83) as
shown.
Insert an Extension Leg (89) into the base of the
Uprights (84) as shown. Hold two Extension Leg
Nuts (67) in the bottom of the Extension Leg.
Next, insert two Extension Leg Bolts (65) into
the top of the Extension Leg, and firmly tighten
the Extension Leg Bolts into the Extension Leg
Nuts.
Star Washer (8)–4
Console Bolt (64)–4
Wheel Nut (13)–2
and your own Phillips screwdriver
1" Tek Screw (83)–4
Extension Leg Bolt (65)–4
1
65
58
6
Handrail Bolt (64)–4
Extension Leg Bolt (96)–4
.
Screw (3)–2
84
82
67
89
82
83