Gold's Gym CWTL05607.4 User Manual page 19

THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement, to select an audio trainer set-
ting, to adjust the volume, and to turn on and turn off
the demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
The center of
the display will
show the total
number of hours
that the treadmill
has been oper-
ated. The lower
part of the dis-
play will show
total number of miles or kilometers that the walking belt
has moved. In addition, an E for English miles or an M
for metric kilometers will appear in the lower part of the
display. To change the unit of measurement, press the
Speed increase button.
The upper left part of the
display will show the per-
sonal trainer audio setting. If
you select ON as the audio
setting, the personal trainer
will guide you through your
workouts and give detailed instructions. If you select
the OFF setting, your personal trainer will simply guide
you through your workouts. Press the Incline decrease
button to change the audio setting if desired.
You can adjust the volume
of the personal trainer
audio (0 through 5) by
pressing the Incline in-
crease button repeatedly.
The volume setting appears
as the upper right digit in the display.
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned on,
the console will function nor-
mally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a "d" will ap-
pear in the lower right corner of the display while the in-
formation mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Locate the audio wire. Plug one end into the audio jack
near the Start button. Then, plug the audio wire into a
jack on your MP3 player, CD player, or other personal
audio player. Make sure that the audio wire is fully
plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume on your personal audio player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
19